Hi,
I have build a computing server based on a Threadripper 2990wx on the x399 AORUS Extreme motherboard. Unfortunately, I couldn't find any recommended memory set around here and thus was left to hope to get a good fit..... which I guess kinda failed.
The memory kit is a F4-3200C14Q2128GTZSW. I know it is for a X99 but looks like this is all that is available... I was hoping to get 14CL at 1.35V but at 2.933GHz with this set.
First attempt was running stock speed, 15CL, 1.2V memtest86. Single CPU, round robin and sequential are doing good. Multi-CPU crashed.
I updated the firmware to F5g and ran again multi-CPU but got the same result.
Stock speed was working single CPU, pushed my luck XMP1 CL14 3.200GHz single CPU. Still good, but multi-CPU crashes again.
Tried to get the memory down to CL14 2.933GHz multi-CPU and got errors before the crash.
Not sure what to think of. I am puzzled. CPU temperature is about 40 degrees; so heatsink is well attached and doing its job. Should I attempt to reseat the CPU?
tcn
I have build a computing server based on a Threadripper 2990wx on the x399 AORUS Extreme motherboard. Unfortunately, I couldn't find any recommended memory set around here and thus was left to hope to get a good fit..... which I guess kinda failed.
The memory kit is a F4-3200C14Q2128GTZSW. I know it is for a X99 but looks like this is all that is available... I was hoping to get 14CL at 1.35V but at 2.933GHz with this set.
First attempt was running stock speed, 15CL, 1.2V memtest86. Single CPU, round robin and sequential are doing good. Multi-CPU crashed.
I updated the firmware to F5g and ran again multi-CPU but got the same result.
Stock speed was working single CPU, pushed my luck XMP1 CL14 3.200GHz single CPU. Still good, but multi-CPU crashes again.
Tried to get the memory down to CL14 2.933GHz multi-CPU and got errors before the crash.
Not sure what to think of. I am puzzled. CPU temperature is about 40 degrees; so heatsink is well attached and doing its job. Should I attempt to reseat the CPU?
tcn
Comment