Announcement

Collapse
No announcement yet.

Need help with Geforce GTX 1070 and GA-Z170X-Gaming 3-EU

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help with Geforce GTX 1070 and GA-Z170X-Gaming 3-EU

    So I bought new parts a few days ago and assembled them, the problem I ran into is that the display is not working on my GPU.

    I've searched far and wide and I came across the same solution over and over which is change your PCIe slot gen to 3.
    Solved New GTX 1070 Display ports not working - Windows 10 Forums
    (not sure if I'm allowed to post this please remove it not)

    But my bios version F3 on the motherboard doesn't have the option to change the PCIe slot gen.


    Please help me so I can use my GPU.

    Things I've tried,
    Disable the intergrated graphic card and set PCI slot 1 as boot gpu. (still black screen had to reset bios)
    Try different ports (I tried hdmi and dvi-d dual link)

    The most logical solution I can think of is use a bios version where I can change the PCIe gen simply,
    I must say I am semi tech savvy but I have no experience with BIOS at all so a simple step by step solution would be great if you could take the time.


    Thank you in advance.

    specs :
    Intel Core i5 6600K
    Gigabyte GA-Z170X-Gaming 3-EU
    Gigabyte GeForce GTX 1070 G1 Gaming
    Samsung 850 EVO 250GB
    Seasonic S12II-Bronze 620W
    G.Skill RipJaws V - DDR4 2400Mhz 16GB
Working...
X