Coretemp cannot read temps from CPU

[AKNRI]

I'm not sure if this was the right place to post this, however I am willing to bet it's related to some BIOS setting I haven't changed.

Gigabyte Z170X-Gaming 5 running F5h BIOS
Core i3-6100

I just got everything installed, i3 OC'd to 4.3GHz at 1.32v, Coretemp cannot read any temps and starts up at 100 degrees C and stays there, HWMonitor displays CPU temps but it doesn't seem accurate at all. I recall reading somewhere that BCLK OC'ing non-K CPUs would result in no temps being able to be read by 3rd party apps, but I wanted to confirm if this was the case or if I'm just missing some setting in BIOS to allow temperatures to be read?

Any help would be appreciated!

[stasio]

Re: Coretemp cannot read temps from CPU

Use HWiNFO or AIDA64.

Btw,
CoreTemp ver.1.1 ?

[AKNRI]

Re: Coretemp cannot read temps from CPU

Use HWiNFO or AIDA64.

Btw,
CoreTemp ver.1.1 ?

Yes, V1.1

Does HWinfo or AIDA64 have a minimized mode?

[stasio]

Re: Coretemp cannot read temps from CPU

yes

[AKNRI]

Re: Coretemp cannot read temps from CPU

---

Have AIDA64 working, however it doesn't seem like the CPU temps are reading accurately. Idle temps jump from 32-36 constantly and sometimes goes up to 56 and back down to 32 all within a matter of seconds.

[stasio]

Re: Coretemp cannot read temps from CPU

---

Have AIDA64 working, however it doesn't seem like the CPU temps are reading accurately. Idle temps jump from 32-36 constantly and sometimes goes up to 56 and back down to 32 all within a matter of seconds.

So, it's mean that you have some activities in idle.
Btw,
Core Temp 1.2 is out...

- Fix: Recognition for some Xeon processors.
- Fix: Driver load failure on Windows 7 and Vista.

- Known issues: Some systems running Windows 10 Anniversary may still have driver load failure.