No announcement yet.

Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

    Hi there,
    Got 4 sticks of this DDR4 ram: CMK16GX4M4A2800C16
    http://www.corsair.com/fr-fr<wbr>/vengeance-lpx-16gb-4x4gb-dd<wbr>r4-dram-2800mhz-c16-memory-kit-black-cmk16gx4m4a2800c16



    http://download.gigabyte.asi<wbr>a/FileList/Memory/mb_memory_ga-x99-gaming-g1-wifi.pdf



    This ram shows up as XMP available using 4 sticks.
    For some reason I'm unable to enable XMP so I can utilise the 2800mhz ram speed.
    The XMP tab is greyed out and I cant turn it on.

    https://www.dropbox.com/s/bu<wbr>7vc6qmbvf0uzc/IMAG0585.jpg?dl=0



    As you can see, it only shows disable. I have also tried to run the ram memory speed up to 2800 mhz, however I get several beeps when I restart the pc, after that the pc will turn off and turn on again with the auto speed of 2133 mhz.
    I have updated my bios to the latest one (F9)
    Mobo: GA-X99-Gaming G1 WIFI
    Thanks for your help

    Update: Tried to reset the bios by removing the battery, still cant enable XMP

  • #2
    Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

    Does the RAM has XMP profile(s)? Not all RAMs do. Get CPU-Z and check SPD tab to see if it does.
    To post BIOS screen captures use the BIOS build it screen capture

    Comment


    • #3
      Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

      Originally posted by Chike View Post
      Does the RAM has XMP profile(s)? Not all RAMs do. Get CPU-Z and check SPD tab to see if it does.
      To post BIOS screen captures use the BIOS build it screen capture
      The RAM does support XMP profiles and it does appear at the memory modules accepted by this particular mobo.

      1:http://download.gigabyte.asia/FileLi...ng-g1-wifi.pdf

      2:http://www.corsair.com/~/media/Corsa...patibility.pdf

      3: The RAM package tells you that this RAM has XMP profiles

      Still cant figure out.

      Can someone tell me how to manually set up the memory frequency to 2800 mhz?

      Thanks

      Comment


      • #4
        Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

        Mostly problem for all manufacturers (GB,Asus,MSI...) is INTEL CPU Microcode ...more info here:
        GIGABYTE X99 Motherboard Discussion/Club - Page 44

        I just received latest Microcode,then I can insert in your latest BIOS F9.
        Btw,
        set everything to default ...click with your mouse on XMP..."Disabled"...bellow small arrow should appear XMP1 and XMP2.

        Press F2 to be in Classic mode and taking screen from BIOS is F12.

        Read Manual page 47 & 48.


        On your pic:
        https://www.dropbox.com/s/bu7vc6qmbv...G0585.jpg?dl=0
        Memory frequency is set to 4000MHz !!.

        Comment


        • #5
          Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

          Originally posted by stasio View Post
          Mostly problem for all manufacturers (GB,Asus,MSI...) is INTEL CPU Microcode ...more info here:
          GIGABYTE X99 Motherboard Discussion/Club - Page 44

          I just received latest Microcode,then I can insert in your latest BIOS F9.
          Btw,
          set everything to default ...click with your mouse on XMP..."Disabled"...bellow small arrow should appear XMP1 and XMP2.

          Press F2 to be in Classic mode and taking screen from BIOS is F12.

          Read Manual page 47 & 48.


          On your pic:
          https://www.dropbox.com/s/bu7vc6qmbv...G0585.jpg?dl=0
          Memory frequency is set to 4000MHz !!.
          Hi there,

          Are you able to insert the Microcode into the latest F9 BIOS and then share it with google drive or dropbox?

          Do you want me to find if I can enable XMP before of updating F9 BIOS that you are going to mod? If that's the case, I dont see any small arrow.
          I was about to RMA my RAM memory, however if the pc shop finds it to work, I'll have to pay some money back to them, so I rather wait until you can do the mod F9 BIOS and test it out.

          And Yes, the picture I have added is wrong, I was just curious to know the max memory frequency, everything on the BIOS has been set to default.

          Thanks for your help.

          Ps: The Microcode wont break my board, will it?

          Comment


          • #6
            Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

            Yes,I want to found XMP first with existing BIOS F9.

            Click image for larger version

Name:	IMAG0585.jpg
Views:	1
Size:	154.9 KB
ID:	754827

            small arrow noted in BLUE colour....do not touch anything else.

            Of course want break your board..donn't worry.

            Edit:
            Pressing twice F2 in BIOS your are in Classic mode (BIOS),so you will have something like this:


            XMP Profile2...3000MHZ (on pic above).

            Source:
            http://www.back2gaming.com/reviews/b...rboard-review/
            Last edited by stasio; 02-06-2015, 04:56 AM.

            Comment


            • #7
              Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

              Originally posted by stasio View Post
              Yes,I want to found XMP first with existing BIOS F9.

              [ATTACH]7552[/ATTACH]

              small arrow noted in BLUE colour....do not touch anything else.

              Of course want break your board..donn't worry.

              Edit:
              Pressing twice F2 in BIOS your are in Classic mode (BIOS),so you will have something like this:


              XMP Profile2...3000MHZ (on pic above).

              Source:
              GIGABYTE X99-GAMING G1 WIFI Motherboard Review - Back2Gaming
              Hi Man,

              I have tried to click where you told me the arrow is, the XMP profile IT'S COMPLETELY grayed out, IT WONT CHANGE.

              I have take the following photos so you can see them

              https://www.dropbox.com/s/92lgyrn896...35%5D.BMP?dl=0
              https://www.dropbox.com/s/3fnr1bk1gh...07%5D.BMP?dl=0
              https://www.dropbox.com/s/jvzbxpt3dn...28%5D.BMP?dl=0
              https://www.dropbox.com/s/tryowe2m7w...58%5D.BMP?dl=0

              Do you think that the RAM could be faulty?

              Comment


              • #8
                Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

                I suggest to try one by one memory stick......according to above pic you are right ...or memory don't have XMP (faulty) or
                BIOS problem (which I doubt...but is possible).

                Edit:
                Please read link bellow.....found that people complain about XMP on this memory.....failed to have XMP support:

                http://www.newegg.com/Product/Produc...82E16820233696

                Second things you can set manually......DDR4 2800.... 16-18-18-36.... 1.2V
                Last edited by stasio; 02-06-2015, 05:38 AM.

                Comment


                • #9
                  Re: Can't Enable XMP: Gigabyte X99 Gaming GI WIFI

                  Originally posted by stasio View Post
                  On your pic:
                  https://www.dropbox.com/s/bu7vc6qmbv...G0585.jpg?dl=0
                  Memory frequency is set to 4000MHz !!.
                  Maybe GB engineers need to learn math.


                  I have advise in the 2nd post to use CPU-Z to check SPD tab, and I will add the Memory tab now to verify actual settings applied.

                  Comment


                  • #10
                    Homes247.in- India's most trusted Real Estate & Proptech Portal was founded on the principle of providing an intelligent edge to the millions of Homebuyers out there!

                    Assetz 63 Degree East

                    Durga Petals
                    Klassik Landmark
                    Shriram Chirping Woods
                    Sobha Clovelly
                    Ecolife Elements of Nature
                    Yashasvi Green Avenues
                    Bavisha Urban Homes
                    Adarsh Greens
                    Ahad Serenity

                    Comment


                    • #11

                      Comment


                      • #12
                        When Noah Ready-Campbell was a youthful grownup, he worked for his father?s development firm. Back again then, he dreamed of a working day when robots may acquire in excess of the filthy, repetitive pieces of his job, for example earthmoving and leveling. Years later on, Ready-Campbell still left his task as an engineer with Google to help make that dream occur true. Bagging ten top prizes, researchers shine at the 46th International Exhibition of Inventions of Geneva. The winning innovative technology products enhance knowledge-sharing and bring impact to the society. Ready-Campbell fashioned a start-up identified as Constructed Robotics. The San Francisco, California-based organization develops technology to generate self-driving heavy gear. Ready-Campbell states the company?s goal will be to make development safer, faster and less high priced. The construction business has fallen powering others with regards to using new technologies which include robotics. Crafted Robotics is an element of a new wave of automation. Investors are placing additional and even more income into start-ups which might be acquiring robots, software and also other know-how for construction. The marketplace struggles to search out experienced staff and faces a expanding quantity of unfinished jobs. But self-operating machines are switching the character of developing. Michael Chui is while using the McKinsey World-wide Institute, a business investigation business in San Francisco. Chui instructed the Ap, We require every one of the robots we can easily get, additionally each of the personnel doing the job, in buy to own financial progress. has wedding gift ideas that, of course, come in the form of wedding chocolate . He added, As equipment carry out some on the get the job done that men and women accustomed to do, the men and women should - changeover to other sorts of do the job, which implies a great deal of retraining. Workers at Berich Masonry in Englewood, Colorado, not too long ag

                        Comment


                        • #13

                          Comment


                          • #14
                            Massively multiplayer online role-playing game social network and guild host.

                            Comment


                            • #15
                              KidsOutAndAbout reviews a roller coaster fan's idea of heaven: Cedar Point in Sandusky, OH. But is it appropriate for younger kids? How about older kids? How about multiple generations in a family?

                              Comment

                              Working...
                              X