If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Im (still) rocking a P67A-D3-B3 (rev. 1.0) Mainboard and just got my hands on a i7 3770k.
Since I cannot set the multiplier higher than 39 I wanted to do a bios update.
And also this post in this thread (page 111) here.
Could not flash it and found this post here and thought yes there is a solution.
I found a U1D bios in this post here and thought (first this then modded UA6) but I cannot flash the U1D version either.
At the moment I have the latest bios version for the rev 1 voard (F7).
Can anyone help me to figure out a way to get UEFI on that board so I can overclock my i7 3770k??
Is there any modified Bios for EX58 UD3R? Quite old mobo but still need to know best useful one. Now I have Gigabyte Official FK version bios on it but I found modified FK version which includes Meltdown and spectre patches for Westmere microprocessors.
Hello, i have kept looking for a bios mod for GA-EP35C-DS3R F4 bios to work with ssd alot better and i cant find it anywhere, can someone please help me and do bios mod, thanks
I tried to mod my own bios for Gigabyte X99P-SLi using the latest 25B from the Gigabyte webiste, everything came through as checked by UMU. I must be doing something wrong, do i have to modify the filename perhaps? Need all of the latest microcode updates please!
Can you help me with my MB GA-Z170-HD3 DDR3? validation => Intel Core i5 6400 @ 4564.81 MHz - CPU-Z VALIDATOR
I have a problem with overclocking one stick of RAM (Samsung M378B1G73DB0-CK0), i can't run it with CAS latency above 13, the motherboard does not to start, even if the memory frequency is set to 1333. I tried different versions of BIOS, like the latest versions of F21f, F21c, and earlier ones. Now, I am using BIOS for overclocking a skaylake from the motherboard GA-Z170-HD3 (with DDR4) F6E. This version is the most stable for my motherboard, than native F5B and F5C.
This problem is the motherboard from gigabytes (= BIOS), because on boards from other manufacturers, this stick of RAM worked on timings 15-15-15.
Another memory stick (M378B1G73EB0-CK0) works great at frequencies above 3000 MHz:
Stasio, can you help me asap? I'm using a X79 UD3 (Gigabyte) MOBO with an I7-3820 (non-K).
You have any moded bios to me? I can't overclock this MOBO on F16 or F20 bios (on gigabyte website just have those two options) because i'm on REV 1.0 (remember taiwanese guy blowing up his mobo while overclocking? Yes, thats my mobo).
I'm not using the audio and LAN controller, I just need a moded bios that works with SSD and Windows 8.1 Pro x64.
Can we talk?
Comment