GIGABYTE Modified Bios

[Teddybehr]

Re: GIGABYTE Modified Bios

Thanks Teddybehr, I need to check what my previous Mod15 BIOS was using as that has caused me no issues at all. As I only boot into OS X (via Clover) this might not be an issue for me?

You're welcome!

Ohhhhh Hackintosh are so over my pay grade
If I were you I would stick with the 13.1.0.2126 just to be safe.
But it may not matter also anyway since the kernel might be able to pass through.
UEFI is a transparent layer but Clover seems to tap the firmware/hardware with 3 different possibilities including UEFI emulation.
I would ask Stasio here or Fernando on its win-raid website.
That is the kind of challenge he likes (Fernando).
Sorry to be so clueless
regards

[D-an-W]

Re: GIGABYTE Modified Bios

What are the issues with the versions you mentioned when running Windows etc?

[Teddybehr]

Re: GIGABYTE Modified Bios

What are the issues with the versions you mentioned when running Windows etc?

See post 4424 and browse Fernando win-raid website. A whole universe full of mysteries will be reveal to you
regards

[taxman]

Re: GIGABYTE Modified Bios

Can i please request an updated version of this mod bios thanks.

GA-Z77X-D3H BIOS F18i mod z77xd3h_mod_18i
Modified with :
Intel Legacy RAID for SATA 11.6.0.1702 to 13.1.0.2030
Intel UEFI RAID SataDriver 11.6.0.1702 to 13.1.0.2030
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
Marvell 88SE91xx Adapter BIOS 1.0.0.0027 to 1.0.1.0025
Intel PCI Accelerated SVGA BIOS 2158 to 2170
Intel Sandy GOPdriver 2.0.1023 to 2.0.1024
Intel Ivy GOPdriver 3.0.1023 to 3.0.1027
CPU MicroCode Pack (with Sandy 6A728 and Ivy 6A919)
ME firmware 8.1.30.1350 to 8.1.51.1471
Modified splash logo 2

[Priskvark]

Re: GIGABYTE Modified Bios

Can i please request an updated version of this mod bios thanks.

GA-Z77X-D3H BIOS F18i mod

You may try this one. It's based on a more recent BIOS.

[taxman]

Re: GIGABYTE Modified Bios

You may try this one. It's based on a more recent BIOS.

Its based on the F18b bios - I need the F81i has a fix for audio and mSata for win8.1.

[Teddybehr]

Re: GIGABYTE Modified Bios

Its based on the F18b bios - I need the F81i has a fix for audio and mSata for win8.1.

There you go:
Modified with:

Intel Legacy RAID for SATA 13.1.0.2030 to 13.1.0.2126
Intel UEFI RAID SataDriver 13.1.0.2030 to 13.1.0.2126
Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6
Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5
Marvell 88SE91xx Adapter BIOS 1.0.1.0025 to 1.0.1.0034
Intel PCI Accelerated SVGA BIOS 2158 to 2170
Intel Sandy GOPdriver 2.0.1023 to 2.0.1024
Intel Ivy GOPdriver 3.0.1023 to3.0.1027
CPU MicroCode Sandy 6A7-28 to 6A7-29
CPU Microcode Ivy 6A9-19 to 6A9-1B
ME firmware 8.1.30.1350 to 8.1.51.1471
Modified splash logo 2

z77xd3h_mod_18i_T1

After flash unpdate to latest MEI firmware
ME Firmware_8.1.52.1496

Next time give a shot at UBU
Regards

in case you wonder why I did not put v13.2 and up or v14 read previous post or go to win-raid website

[Priskvark]

Re: GIGABYTE Modified Bios

Its based on the F18b bios - I need the F81i has a fix for audio and mSata for win8.1.

not the newest available BIOS for the GA-Z77X-D3H board.

[taxman]

Re: GIGABYTE Modified Bios

[ATTACH]7800[/ATTACH]not the newest available BIOS for the GA-Z77X-D3H board.

Hi Priskvark and thank you for your reply, However the link you posted to me - went to page 103 with no bios found until page 104 which was the F18b Bios update. Also i check gigabyte for the latest bios beta and it was F18i for the rev 1.0 GA-Z77X-D3H. Could you post a direct link to it or the correct page please for the F18k. And again thank you i just got confused with the page link to 103.

@ Teddybehrs - Thanks for your time and effort for this request. I have not modded a bios since the XGI Volari GPU days however i will look at the UBU link.

[Trynn]

Re: GIGABYTE Modified Bios

GA-Z87-D3HP - F7-mod

Modified with :

Intel Legacy RAID ROM 12.7.0.1936 to 13.5.0.2164
Intel UEFI SataDriver 12.5.0.1815 to 13.5.0.2164
Intel PCI Accelerated SVGA PC 2179 to 2180
Intel GOPdriver 5.0.1036 to 1037
Intel Boot Agent PXE 1.5.04 to 1.5.61
Intel GigabitLan X64 5.1.00 to 6.4.13
CPU MicroCode 06C319 to 06C31C
ME firmware 9.0.30.1482
Modified splash logo 2

MEI 9.0.31.1487 (Firmware) flash yourself in Windows mode.

Hey,
i'm running a Gigabyte Z87-D3HP Mainboard with Xeon E3 1230-V3 CPU.
Flashed this Firmware and Updated the MEI. But still not able to enable AllCore @3.7 Ghz.
With Prime95 Load Cores still goes to 3.3 Ghz.

Am i missing something?

[Priskvark]

Re: GIGABYTE Modified Bios

Hi Priskvark and thank you for your reply, However the link you posted to me - went to page 103 with no bios found until page 104 which was the F18b Bios update. Also i check gigabyte for the latest bios beta and it was F18i for the rev 1.0 GA-Z77X-D3H. Could you post a direct link to it or the correct page please for the F18k. And again thank you i just got confused with the page link to 103.

There is something weird going on with the forum.

It is possible to give a direct link to a specific post but after some testing I am now aware of that the links depend on all users having the same "Number of Posts to Show Per Page" specified in their "General settings". (How to avoid that problem)

You and I had obviously different settings.

I have now changed my settings to "Use forum default" and the link is recalculated to the "default" page (411). If you once again click on the link in my post you will probably find what I intended you to see (well, at least if you also have your settings at "Use forum default").

[Teddybehr]

Re: GIGABYTE Modified Bios

Hey,
i'm running a Gigabyte Z87-D3HP Mainboard with Xeon E3 1230-V3 CPU.
Flashed this Firmware and Updated the MEI. But still not able to enable AllCore @3.7 Ghz.
With Prime95 Load Cores still goes to 3.3 Ghz.

Am i missing something?

Hi,
This is pretty normal. The best that you will probably be able to achieve with Turbo boost on is 37x/37x/36x/35x
You can do 35X on all core probably though.
Hope it helps

[Teddybehr]

Re: GIGABYTE Modified Bios

@ Teddybehr - Thanks for your time and effort for this request. I have not modded a bios since the XGI Volari GPU days however i will look at the UBU link.

You're welcome
Do not hesitate to come back here for other mod if you don't feel OK using UBU
Regards

[profJim]

Re: GIGABYTE Modified Bios

There is something weird going on with the forum.

It is possible to give a direct link to a specific post but after some testing I am now aware of that the links depend on all users having the same "Number of Posts to Show Per Page" specified in their "General settings".

You and I had obviously different settings.

I have now changed my settings to "Use forum default" and the link is recalculated to the "default" page (411). If you once again click on the link in my post you will probably find what I intended you to see (well, at least if you also have your settings at "Use forum default").

To provide a link to a specific post, place the mouse pointer over the post number at the right end of the blue bar at the top of the specific post.
Right click on the the post number (e.g. #4452 for your post) and and select the Copy Link Location option, then you can paste a direct link to the post.

My preference is to use the bold and underline format options when linking to an individual post, for example:
http://forums.tweaktown.com/gigabyte...tml#post499592, post #4452.

Including the actual post number isn't required, but it might help.

[ROTOR]

Re: GIGABYTE Modified Bios

okay ... here we go.

Bios for x58a-ud9 f6e

- Support for VT-D
- JMicron 1.07.28
- Intel Raid 11.5.0.1414
- Marvell Bios 1.0.0.1033 / Firmware 2.2.0.1125
- Realtek 2.48

Link: http://ompldr.org/vZXE0Nw/x58a-ud9_vt-d_mod~.7z

Hi!

Anyone has this modden bios with vt-d suppord?

thanks!