If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
BIOS's bellows are modified,consist of (depend of board):
Intel RAID for SATA 12.6(7).0.1867(1936) to 13.1.0.2030
Intel EFI SataDriver 12.6(7).0.1867(1936) to 13.1.0.2030
Marvell 88SE91xx Adapter 1.0.0.0027 to 1.0.1.0025
Intel Boot Agent GE 1.5.04 to 1.5.50
Intel GigabitLan X64 5.1.00 to 6.0.24
Intel PCI Accelerated SVGA 2179 to 2180
Intel GOPdriver 5.0.1037
CPU Microcode (with 06C317)
ME firmware 9.0.30.1482 Modified splash logo 2
Note:
MEI 9.0.31.1487 (Firmware) flash yourself in Windows mode.
Thanks for this I'm in the process of getting the new modded F9 Bios SLIC for windows 7 on another forum *giggles*
UPDATE: I was able to to flash my motherboard GA-Z87X-UD4H F9 Mod using Gigabytes @BIOS program. I could not flash using the QFlash inside the BIOS said something about i need an updated Qflash Utility or something like that. I blame Gigabyte for this cause it happened with the original non modded Bios also.
Hi to All
The help in BIOS gigabyte x58a-oc modification is necessary to me: to replace option rom Marvell 9182 with new Marvell 9182 Rom 1.0.0.0025 or above.
BIOS F5B, with BIOS is newer than this, my motherboard (i7- 970 processor) doesn't work, link for BIOS http://download.gigabyte.eu/FileList...58a-oc_f5b.exe.
Help me please!
I long looked for an output from this situation. By means of CBROM 1.55 (version 1.98 didn't allow to flash then BIOS) I modified the BIOS.F5b having integrated into it Marvell 9182 Rom 1.0.0.0025.
I flashed motherboard - everything works. Through Ctrl+M saw that Marvell 9182 Rom exchanged, the speed of SATA increased.
Intel RAID for SATA 11.5.0.1347 to 13.1.0.2030
Marvell 88SE91xx Adapter 1.0.1.0025
Realtek Undi 2.009 to 2.026
Intel PCI Accelerated SVGA 2130 to 2170
Intel GOPdriver to 3.0.1027
CPU Microcode (with IB/SB 19/28)
ME firmware 8.0.0.1351
ME Firmware 8.1.52.1496 flash yourself in Windows mode.
Intel RAID for SATA 11.6.0.1702 to 13.1.0.2030
Intel UEFI SataDriver 11.6.0.1702 to 13.1.0.2030
Intel RSTe RAID for SATA 3.7.0.1049 to 3.8.0.1029
Intel RSTe EFI SataDriver 3.7.0.1049 to 3.8.0.1029
Marvell 88SE91xx/92xx Adapter 1.0.1.0025
Intel Boot Agent GE 1.3.95 to 1.5.50
Intel UNDI EFI 5.1.00 to 6.1.16
Realtek GbE ROM 2.56 to 2.59
Realtek Undi 2.015 to 2.026
Intel (06D1) CPU Microcode 106
Intel (06D2) CPU Microcode 20C
Intel (06D3) CPU Microcode 304
Intel (06D5) CPU Microcode 513
Intel (06D6) CPU Microcode 619
Intel (06D7) CPU Microcode 710
Intel (06E0) CPU Microcode 008
Intel (06E2) CPU Microcode 20D
Intel (06E3) CPU Microcode 308
Intel (06E4) CPU Microcode 424
Intel (06E6) CPU Microcode 600
Intel (06E7) CPU Microcode 703
ME Firmware 8.1.40.1416 Modified Splash Logo 2
ME Firmware 8.1.52.1496 flash yourself in Windows mode.
This is the same version ROM that is already in the BIOS listed on the first page, but has been modified to allow TRIM to pass through on RAID 0 configurations on X58 chipsets
Intel RAID for SATA 11.6.0.1702 to 13.1.0.2030
Intel UEFI SataDriver 11.6.0.1702 to 13.1.0.2030
Intel RSTe RAID for SATA 3.7.0.1049 to 3.8.0.1029
Intel RSTe EFI SataDriver 3.7.0.1049 to 3.8.0.1029
Marvell 88SE91xx/92xx Adapter 1.0.1.0025
Intel Boot Agent GE 1.3.95 to 1.5.50
Intel UNDI EFI 5.1.00 to 6.1.16
-------------------------------
Intel (06D1) CPU Microcode 106
Intel (06D2) CPU Microcode 20C
Intel (06D3) CPU Microcode 304
Intel (06D5) CPU Microcode 513
Intel (06D6) CPU Microcode 619
Intel (06D7) CPU Microcode 710
---------------------------------
Intel (06E0) CPU Microcode 008
Intel (06E2) CPU Microcode 20D
Intel (06E3) CPU Microcode 308
Intel (06E4) CPU Microcode 424
Intel (06E6) CPU Microcode 600
Intel (06E7) CPU Microcode 703
--------------------------------
ME Firmware 8.1.40.1416 Modified Splash Logo 2
ME Firmware 8.1.52.1496 flash yourself in Windows mode.
I long looked for an output from this situation. By means of CBROM 1.55 (version 1.98 didn't allow to flash then BIOS) I modified the BIOS.F5b having integrated into it Marvell 9182 Rom 1.0.0.0025.
I flashed motherboard - everything works. Through Ctrl+M saw that Marvell 9182 Rom exchanged, the speed of SATA increased.
I have I isue too, one out of two boot the bios don't detect the hard drive on marvell ports, i don t know if there is something newer than Marvell 9182 Rom 1.0.0.0025. that could solve the problem but I'm about to trow the x58.g1.guerrilla to the garbage
I have I isue too, one out of two boot the bios don't detect the hard drive on marvell ports, i don t know if there is something newer than Marvell 9182 Rom 1.0.0.0025. that could solve the problem but I'm about to trow the x58.g1.guerrilla to the garbage
thanx stasio for the answer are you tallking about this one Marvell 92xx ROM 1.0.0.0034 ?
the ship is a Marvell SE9182 does the 92xx work on it ?
I also see on your link that there is a ROM 1.0.1.0025 for 91xx pobably newer than the 1.0.0.0025 I don't know how to intall this; I though it was necesery to be integrated to a bios to be install.
there is also a Marvell Firmware 2.2.0.1125b don't know the difference beween rom and firmware. In my case I have just a ssd plug on marvell controler in AHCI
Last edited by chapio; 03-24-2014, 01:59 AM.
Reason: precision
Comment