If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
^
You mean normal or modded BIOS?
Btw,
F9c is latest.
I already flashed your modded F9C a couple of months ago.
But on Page 372 you posted this: GA-Z87X-OC - F10a-mod
Modified with :
Intel Legacy RAID ROM 12.7.0.1936 to 13.1.0.2126
Intel UEFI SataDriver 12.5.0.1815 to 13.1.0.2126
Intel PCI Accelerated SVGA PC 2179 to 2180
Intel GOPdriver 5.0.1036 to 1037
Intel Boot Agent PXE 1.5.04 to 1.5.53
Intel GigabitLan X64 5.1.00 to 6.2.08
CPU MicroCode 06C319 to 06C31A
ME firmware 9.0.30.1482 Modified splash logo 2
MEI 9.0.31.1487 (Firmware) flash yourself in Windows mode.
So, what is the difference and which one is better?
hi
there was a bios for the GA-Z77X-UP5 TH 12j mod 10 wich has disappeared it had an older SVGA/GOP rom in it wich worked well with clover for hackintosh
i think there were complaints about usb and it was withdrawn i have been using it with no problem. however i can not remember who did the mod and what ver of SVGA/GOP was in it
if you were or know who did it i would appreciate a mod done on the latest beta f12 "i believe" with latest roms but with the same ver of SVGA/GOP
GA-Z77X-UP5TH BIOS F12j Mod10 (USB Per-Port Disable Control Enabled, based on F12j mod 9 released by Virtualfred)
Modified with :
Intel Legacy RAID ROM 11.6.0.1702 to 13.5.0.2164
Intel UEFI SataDriver 11.6.0.1702 to 13.5.0.2164
Marvell 88SE91xx SATA RAID 1.0.0.0027 to 1.0.1.0025
Intel Boot Agent PXE 1.3.81 to 1.5.61
Intel EFI UNDI 4.9.00 to 6.4.13
Intel PCI Accelerated SVGA 2137 PC 14.34 to 2170
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023 to 3.0.1027
CPU MicroCode Pack (with Sandy 6A729 and Ivy 6A91B)
ME Firmware 8.1.30.1350 to 8.1.51.1471
Modified splash logo 2 UP5Hf12JMOD10
GA-Z77X-UP5TH BIOS F12 Mod2 (Based on latest available Z77X-UP5TH bios)
Modified with :
Intel Legacy RAID ROM 11.6.0.1702 to 13.5.0.2164
Intel UEFI SataDriver 11.6.0.1702 to 13.5.0.2164
Marvell 88SE91xx SATA RAID 1.0.0.0027 to 1.0.0.0034
Intel Boot Agent PXE 1.3.81 to 1.5.61
Intel EFI UNDI 4.9.00 to 6.4.13
Intel PCI Accelerated SVGA 2137 PC 14.34 to 2170
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023 to 3.0.1027
CPU MicroCode Pack (with Sandy 6A729 and Ivy 6A91B)
ME Firmware 8.1.30.1350 to 8.1.51.1471 Z77XU5THMOD2
All bioses are tested with my motherboard.
is it possible for you to do latest f12 but with older svga
put this ver in Intel PCI Accelerated SVGA 2158 as this seems to be the best one for clover on hackintosh
is it possible for you to do latest f12 but with older svga
put this ver in Intel PCI Accelerated SVGA 2158 as this seems to be the best one for clover on hackintosh
Intel Legacy RAID ROM 11.6.0.1702 to 13.1.0.2030
Intel PCI Accelerated SVGA 2170 to 2158
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023 to 3.0.1027
Intel Boot Agent PXE 1.5.53 to 1.5.61
Intel EFI UNDI 6.2.08 to 6.4.13
Marvell 88SE91xx SATA RAID 1.0.0.0027 to 1.0.0.0034
CPU MicroCode Pack (with Sandy 6A728 and Ivy 6A919)
ME Firmware 8.1.0.1248
Modified splash logo 2
Note:
ME firmware 8.1.52.1496 flash yourself in Windows mode.
Intel Legacy RAID ROM 11.6.0.1702 to 13.1.0.2030
Intel PCI Accelerated SVGA 2170 to 2158
Sandy GOPdriver 2.0.1023 to 2.0.1024
Ivy GOPdriver 3.0.1023 to 3.0.1027
Intel Boot Agent PXE 1.5.53 to 1.5.61
Intel EFI UNDI 6.2.08 to 6.4.13
Marvell 88SE91xx SATA RAID 1.0.0.0027 to 1.0.0.0034
CPU MicroCode Pack (with Sandy 6A728 and Ivy 6A919)
ME Firmware 8.1.0.1248
Modified splash logo 2
Note:
ME firmware 8.1.52.1496 flash yourself in Windows mode.
Intel RAID for SATA 13.2.0.2134 to 13.5.0.2164
Intel EFI SataDriver 13.2.0.2134 to 13.5.0.2164
EFI GOP Driver Broadwell 5.5.1023 to 5.5.1031
CPU Microcode 06C319 to 06C31C
Comment