No announcement yet.

GA-EP45-UD3R 1.0 + Noctua NH-U12P SE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-EP45-UD3R 1.0 + Noctua NH-U12P SE

    Good evening everyone,

    I just got a better heatsink -Noctua NH-U12P SE- and now need know if i can conect the two fans (noctua NF-P12) to the CPU FAN header of this matherboard.

    Can I conect simultaneously two fans to thee CPU FAN Header?

    I read that input power of Noctua NF-P12 is 1.08w.

    Thanks and excuse my english

  • #2
    Re: GA-EP45-UD3R 1.0 + Noctua NH-U12P SE

    i dont see why not,you will need a pwm fan splitter cable like the one in the link below so you can control the speed according to temps or by easytune

    PWM Case Cooling Fan Power Connector Y Splitter 4 pin on eBay (end time 11-Apr-10 02:58:07 BST)
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) [email protected]
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

    Comment


    • #3
      Re: GA-EP45-UD3R 1.0 + Noctua NH-U12P SE

      I have the same cooler installed on GA-EP45-UD3 and I have both fans connected to cpu fan header using Noctua's own splitter. Fans are voltage controlled so you need to set that option in bios.
      Gigabyte GA-Z68XP-UD4
      i7-2600K @ 4.5 GHz, EK Supreme HF
      Kingston HyperX Genesis PC3-12800 2* 4 GB
      Radeon HD 7950
      OCZ Agility 3 120 GB
      XFX 650W Core edition
      Fractal Design Arc Midi

      Gigabyte GA-Z77X-UDH5
      i7-3770K @ 4.5 GHz, XSPC Raystorm
      G.Skill Ripjaws X 2* 4 GB
      Radeon HD 6870 * 2
      PNY XL8 120 GB
      Super Flower SF-700P14XE
      Bitfenix Shinobi XL

      Comment


      • #4
        Re: GA-EP45-UD3R 1.0 + Noctua NH-U12P SE

        I've hooked up two 1600 rpm fans using the non-PWM Y-cable splitter to my cpu fan header and other fan headers without any problems.
        Each of my Scythe S-Flex fans draws 2.40 watts (0.20 amps) at full speed.

        **edit** Your english is fine.
        Attached Files
        Q9650 @ 4.10GHz [9x456MHz]
        P35-DS4 [rev: 2.0] ~ Bios: F14
        4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
        MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
        Seasonic SS-660XP2 80 Plus Platinum psu (660w)
        WD Caviar Black WD6401AALS 640GB (data)
        Samsung 840 Pro 256GB SSD (boot)
        SLI @ 16/4 works when running HyperSLI
        Cooler Master 120XL Seidon push/pull AIO cpu water cooling
        Cooler Master HAF XB computer case (RC-902XB-KKN1)
        Asus VH242H 24" monitor [1920x1080]
        MSI N460GTX Hawk (1GB) video card
        Logitech Z-5500 Digital 5.1 Speakers
        win7 x64 sp1 Home Premium
        HT|Omega Claro plus+ sound card
        CyberPower CP1500PFCLCD UPS
        E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
        Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
        Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
        HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
        win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
        .

        Comment

        Working...
        X