Tweet
Re: Help overclocking i7-930 on a GA-EX58-UD5
Ok Im having trouble getting 200 BCLK any sortta stable. here are my settings for 190x21 with ht on turbo off. These will pass 10 passes of linx with 2gb ram selected and about 1-2hrs prim blend (dont remember exactly).
Here are the settings that I have tried for 200x21 with HT on. These will bosd with in 2-3 min of prime small FFT. It did pass put test in vantage. The bosd would varry from 0x00000124 or 0x00000101 which i would pump up vcore or vtt depending on which came up or I would get other bosd which I tried more vcore or vtt or upping pci to 101. What do you think is holding me up?
Ok Im having trouble getting 200 BCLK any sortta stable. here are my settings for 190x21 with ht on turbo off. These will pass 10 passes of linx with 2gb ram selected and about 1-2hrs prim blend (dont remember exactly).
Code:
Advanced CPU Features: CPU Clock Ratio .........................[21] Intel(R) Turbo Boost Tech ...............[Disabled] CPU Cores Enabled .......................[All] CPU Multi Threading .....................[ENABLED] CPU Enhanced Halt (C1E) .................[ENABLED] C3/C6/C7 State Support ..................[ENABLED] CPU Thermal Monitor .....................[ENABLED] CPU EIST Function .......................[ENABLED] Bi-Directional PROCHOT ..................[ENABLED] Virtualization Technology ...............[ENABLED] Uncore & QPI Features: QPI Clock Ratio..........................[36x] QPI Link Speed ..........................[6.84GHz] Uncore Clock Ration......................[17x] Uncore Frequency ........................[3230MHz] Isonchronous Frequency ..................[ENABLED] Standard Clock Control: Base Clock (BCLK) Control ...............[ENABLED] BCLK Frequency (MHz) ....................[190] PCI Express Frequency (MHz) .............[100] Advanced Clock Control: CPU Clock Drive .........................[800mV] PCI Express Clock Drive .................[900mV] CPU Clock Skew ..........................[0ps] IOH Clock Skew ..........................[0ps] Advanced DRAM Features: Performance Enhance .....................[EXTREAM] Extreme Memory Profile (X.M.P) ..........[DISABLED] System Memory Multiplier (SPD) ..........[8] Memory Frequency (Mhz)...................[1520] DRAM Timing Selectable (SPD) ............[AUTO] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ........................[9] tRCD ....................................[9] tRP .....................................[9] tRAS ....................................[24] Command Rate (CMD).......................[T1] ##Channel A Advanced Timing Control## tRC .....................................[] tRRD ....................................[] tWTR ....................................[] tWR .....................................[] tWTP ....................................[] tWL .....................................[] tRFC ....................................[] tRTP ....................................[] tFAW ....................................[] Command Rate (CMD) ................ ##Channel A Misc Timing Control## Round Trip Latency ......................[] Advanced Voltage Control: Load Line Calibration ...................[ENABLED] CPU Vcore 1.26875v.......................[1.31250v] QPI/VTT Voltage 1.175v ..................[1.355v] CPU PLL 1.800v ..........................[1.800v] PCIE 1.500v .............................[1.500V] QPI PLL 1.100v ..........................[1.140v] IOH Core 1.100v .........................[1.100v] ICH I/O 1.500v ..........................[1.500v] ICH Core 1.1v ...........................[1.100V] DRAM DRAM Voltage 1.500v .....................[1.600v] DRAM Termination 0.750v..................[AUTO] Ch-A Data VRef. 0.750v ..................[AUTO] Ch-B Data VRef. 0.750v ..................[AUTO] Ch-C Data VRef. 0.750v ..................[AUTO] Ch-A Address VRef. 0.750v ...............[AUTO] Ch-B Address VRef. 0.750v ...............[AUTO] Ch-C Address VRef. 0.750v ...............[AUTO]]
Here are the settings that I have tried for 200x21 with HT on. These will bosd with in 2-3 min of prime small FFT. It did pass put test in vantage. The bosd would varry from 0x00000124 or 0x00000101 which i would pump up vcore or vtt depending on which came up or I would get other bosd which I tried more vcore or vtt or upping pci to 101. What do you think is holding me up?
Code:
Advanced CPU Features: CPU Clock Ratio .........................[21] Intel(R) Turbo Boost Tech ...............[Disabled] CPU Cores Enabled .......................[All] CPU Multi Threading .....................[ENABLED] CPU Enhanced Halt (C1E) .................[ENABLED] C3/C6/C7 State Support ..................[ENABLED] CPU Thermal Monitor .....................[ENABLED] CPU EIST Function .......................[ENABLED] Bi-Directional PROCHOT ..................[ENABLED] Virtualization Technology ...............[ENABLED] Uncore & QPI Features: QPI Clock Ratio..........................[36x] QPI Link Speed ..........................[6.84GHz] Uncore Clock Ration......................[16x] Uncore Frequency ........................[3200MHz] Isonchronous Frequency ..................[ENABLED] Standard Clock Control: Base Clock (BCLK) Control ...............[ENABLED] BCLK Frequency (MHz) ....................[200] PCI Express Frequency (MHz) .............[101] Advanced Clock Control: CPU Clock Drive .........................[800mV] PCI Express Clock Drive .................[900mV] CPU Clock Skew ..........................[0ps] IOH Clock Skew ..........................[0ps] Advanced DRAM Features: Performance Enhance .....................[TURBO] Extreme Memory Profile (X.M.P) ..........[DISABLED] System Memory Multiplier (SPD) ..........[8] Memory Frequency (Mhz)...................[1600] DRAM Timing Selectable (SPD) ............[AUTO] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ........................[9] tRCD ....................................[9] tRP .....................................[9] tRAS ....................................[24] Command Rate (CMD).......................[T2] ##Channel A Advanced Timing Control## tRC .....................................[] tRRD ....................................[] tWTR ....................................[] tWR .....................................[] tWTP ....................................[] tWL .....................................[] tRFC ....................................[] tRTP ....................................[] tFAW ....................................[] Command Rate (CMD) ................ ##Channel A Misc Timing Control## Round Trip Latency ......................[] Advanced Voltage Control: Load Line Calibration ...................[ENABLED] CPU Vcore 1.26875v.......................[1.3875v] QPI/VTT Voltage 1.175v ..................[1.455v] CPU PLL 1.800v ..........................[1.840v] PCIE 1.500v .............................[1.500V] QPI PLL 1.100v ..........................[1.240v] IOH Core 1.100v .........................[1.240v] ICH I/O 1.500v ..........................[1.500v] ICH Core 1.1v ...........................[1.200V] DRAM DRAM Voltage 1.500v .....................[1.600v] DRAM Termination 0.750v..................[AUTO] Ch-A Data VRef. 0.750v ..................[AUTO] Ch-B Data VRef. 0.750v ..................[AUTO] Ch-C Data VRef. 0.750v ..................[AUTO] Ch-A Address VRef. 0.750v ...............[AUTO] Ch-B Address VRef. 0.750v ...............[AUTO] Ch-C Address VRef. 0.750v ...............[AUTO]]
Comment