Newbie temp question

[Lsdmeasap]

Re: Newbie temp question

More Vtt then.

How much are you now using?

[REDBULL]

Re: Newbie temp question

Do you mean cpu termination vtt ? i up'd it to 1.240v

thanks

also how do i enable LLC and would it help ?

[Lsdmeasap]

Re: Newbie temp question

LLC setting should be above the Vcore setting.

Try 1.26-1.3 Vtt

[REDBULL]

Re: Newbie temp question

Set the
cpu core at 1.29375v
cpu termination at 1.300v

and still gets blue screen when running occtpt3.310 , my pc's fine and doesnt crash or anthing when running normal so think ill leave it as it is now , when you were on about my memory settings do you mean change the 5-5-5-18 setting and enter them manually at these ?

thanks

[Lsdmeasap]

Re: Newbie temp question

Ya, I meant manually setting your memory timings. Does Prime95 or LinX crash on you, or just OCCT?

You may need 1.325-1.35 Vcore (Or more) and 1.3-1.34 Vtt, that is a high FSB for a quad so using lower voltages to start with isn't going to help you find out. Set it high enough it is stable, then you can lower later as you test

[REDBULL]

Re: Newbie temp question

Thanks , im going away for the easter weekend so wont beable to do any more testing till i get back tuesday, but will update you then .

Happy easter everyone

[Lsdmeasap]

Re: Newbie temp question

Alrighty, enjoy your weekend!

Happy Easter!