Hello,
I need help with oc for ep43 ds2l please.
E5200
4gb of Patriot ddr2 8500
FRYS.com*|*PATRIOT
msi R4830 ddr3 1gb o'c edition
artic silver 5
500w ps
wd 1tgb
Have tried:
<table class="tborder" id="post310955" width="100%" align="center" border="0" cellpadding="6" cellspacing="1"><tbody><tr><tr><td class="alt1" id="td_post_310955"> [code] **** MB Intelligent Tweaker(M.I.T.) ****
Robust Graphics Booster ...............: [fast]
CPU Clock Ratio .......................: [9x]
Fine CPU Clock Ratio.................. 0
CPU Frequency .........................: (255x9) both are shaded out
*******Clock Chip Control********
>>>>>Standard Clock Control
CPU Host Clock Control ................: [Enabled]
CPU Host Frequency (Mhz) ..............: [ 255]
PCI Express Frequency (Mhz) ...........: [100]
C.I.A.2 ...............................: [Disabled]
>>>>Advanced Clock Control
Advanced Clock Control ................: [Press Enter]
CPU Clock Drive .......................: [800mV]
PCI Express Clock Drive ...............: [900mV]
CPU Clock Skew (ps) ...................: [0ps]
MCH Clock Skew (ps) ...................: [0ps]
[B]******DRAM Performance Control********
Performance Enhance ...................: [STANDARD]
(G)MCH Frequency Latch.................: [Auto]
System Memory Multiplier ..............: [4.00D] also 4.00A (neither of them would hold
Memory Frequency (Mhz) .......... 800 : [1020] both are shaded out
DRAM Timing Selectable ................: [Manual]
>>>>>Standard Timing Control
CAS Latency Time ............ 5 .: 7
tRCD .............................. 5 .: 7
tRP'............................... 5 .: 7
tRAS ............................. 15 .: 20
>>>>>Advanced Timing Control
Advanced Timing Control ...............: [Press Enter]
tRRD .............................. 3 .: 4
tWTR .............................. 3 .: 6
tWR .............................. 12 .: 6
tRFC ............................. 52 .: 62
tRTP .............................. 4 .: 5
Command Rate (CMD) ................ 0 .: 2
>>>>> Channel A
Channel A Timing Setting ..............: [Press Enter]
Static tRead Value ............... auto .: 9
tRD Phase0 Adjustment ............. 0 .: Auto -
tRD Phase1 Adjustment ............. 0..: Auto -
tRD Phase2 Adjustment ............. 0..: Auto -
tRD Phase3 Adjustment ............. 0..: Auto -
Trd2rd(Different Rank) ............ .: Auto -
Twr2wr(Different Rank) ............ .: Auto -
Twr2rd(Different Rank) ............ .: Auto -
Trd2wr(Same/Diff Rank) ............ .: Auto -
Dimm1 Clock Skew Control ..............: Auto -
Dimm2 Clock Skew Control ..............: Auto -
DDR Write Training ....................: Auto -
>>>>>> Channel A
Channel A Driving Settings ............: [Press Enter]
Driving Strength Profile ..............: 1066
Data Driving Pull-up Level ............: Auto -
Cmd Driving Pull-up Level .............: Auto -
Ctrl Driving Pull-up Level ............: Auto -
Clk Driving Pull-up Level .............: Auto -
Data Driving Pull-Down Level ..........: Auto -
Cmd Driving Pull-Down Level ...........: Auto -
Ctrl Driving Pull-Down Level ............: Auto -
Clk Driving Pull-Down Level .............: Auto -
**** Channel B Timing Setting ****
Static tRead Value ............... 9
tRD Phase0 Adjustment ............. 0 .: Auto -
tRD Phase1 Adjustment ............. 0 .: Auto -
tRD Phase2 Adjustment ............. 0 .: Auto -
tRD Phase3 Adjustment ............. 0 .: Auto -
Trd2rd(Different Rank) ............ 8 .: Auto -
Twr2wr(Different Rank) ............ 8 .: Auto -
Twr2rd(Different Rank) ............ 7 .: Auto -
Trd2wr(Same/Diff Rank) ............ 9 .: Auto -
Dimm1 Clock Skew Control ..............: Auto -
Dimm2 Clock Skew Control ..............: Auto -
DDR Write Training .........................: Auto -
>>>>> Channel B
Channel B Driving Settings ............: [Press Enter]
Driving Strength Profile ..............: 1066
Data Driving Pull-up Level ............: Auto -
Cmd Driving Pull-up Level .............: Auto -
Ctrl Driving Pull-up Level ..............: Auto -
Clk Driving Pull-up Level ...............: Auto -
Data Driving Pull-Down Level ..........: Auto -
Cmd Driving Pull-Down Level ...........: Auto -
Ctrl Driving Pull-Down Level ............: Auto -
Clk Driving Pull-Down Level .............: Auto -
*****Motherboard Voltage Control*****
Voltage Type.............Normal .......: [Current]
>>>CPU
CPU Vcore ............. 1.2700V ......: [1.400V]
CPU Termination ....... 1.200V ........: [1.48V]
CPU PLL ............... 1.500V ........: [1.65V]
CPU Reference ......... 0.760V ........: [Auto]
>>> MCH/ICH
MCH Core .............. 1.100V ........: [1.340V]
MCH Reference ......... 0.760V ........: [Auto]
MCH/DRAM Ref .......... 0.900V ........: [Auto]
ICH I/O ............... 1.500V ........: [1.570V]
ICH Core .............. 1.100V ........: [1.200V]
>>> DRAM
DRAM Voltage .......... 1.800V ........: [2.1V] also tried 2.00. 1.9, 2.2, 2.3
DRAM Termination ...... 0.900V ........: [Auto]
Channel A Reference ... 0.900V ........: [Auto]
Channel B Reference ... 0.900V ........: [Auto]
Advanced Settings
Password check.........................: [setup]
HD S.M.A.R.T. Capability...............: [Enabled]
CPU Multi-Threading....................: [Enabled]
Limit CPUID Max. to 3 .................: [Disabled]
No-Execute Memory Protect .............: [Enabled]
CPU Enhanced Halt (C1E) ...............: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function......................: [Disabled]
Virtualization Technology..............: [Disabled]
Delay For HDD (Secs)...................: [0]
Full screan Logo Show..................: [Enabled]
Init Display First.....................: [PEG]
Integradted Peripherals
Sata Raid/ACHI Mode....................: [Disabled]
Sata Port0-3 Native Mode...............: [Disabled]
Azalia Codec...........................: [Auto]
Green Lan..............................: [Disabled]
Smart Lan1.............................:
Smart Lan2..........................
With those figures above, my pc wont boot all the way. It booted and restart before posting.
I played with cpu vcore numbers, seem none of them will work.
Thank you.
</td></tr></tr></tbody></table>
I need help with oc for ep43 ds2l please.
E5200
4gb of Patriot ddr2 8500
FRYS.com*|*PATRIOT
msi R4830 ddr3 1gb o'c edition
artic silver 5
500w ps
wd 1tgb
Have tried:
<table class="tborder" id="post310955" width="100%" align="center" border="0" cellpadding="6" cellspacing="1"><tbody><tr><tr><td class="alt1" id="td_post_310955"> [code] **** MB Intelligent Tweaker(M.I.T.) ****
Robust Graphics Booster ...............: [fast]
CPU Clock Ratio .......................: [9x]
Fine CPU Clock Ratio.................. 0
CPU Frequency .........................: (255x9) both are shaded out
*******Clock Chip Control********
>>>>>Standard Clock Control
CPU Host Clock Control ................: [Enabled]
CPU Host Frequency (Mhz) ..............: [ 255]
PCI Express Frequency (Mhz) ...........: [100]
C.I.A.2 ...............................: [Disabled]
>>>>Advanced Clock Control
Advanced Clock Control ................: [Press Enter]
CPU Clock Drive .......................: [800mV]
PCI Express Clock Drive ...............: [900mV]
CPU Clock Skew (ps) ...................: [0ps]
MCH Clock Skew (ps) ...................: [0ps]
[B]******DRAM Performance Control********
Performance Enhance ...................: [STANDARD]
(G)MCH Frequency Latch.................: [Auto]
System Memory Multiplier ..............: [4.00D] also 4.00A (neither of them would hold
Memory Frequency (Mhz) .......... 800 : [1020] both are shaded out
DRAM Timing Selectable ................: [Manual]
>>>>>Standard Timing Control
CAS Latency Time ............ 5 .: 7
tRCD .............................. 5 .: 7
tRP'............................... 5 .: 7
tRAS ............................. 15 .: 20
>>>>>Advanced Timing Control
Advanced Timing Control ...............: [Press Enter]
tRRD .............................. 3 .: 4
tWTR .............................. 3 .: 6
tWR .............................. 12 .: 6
tRFC ............................. 52 .: 62
tRTP .............................. 4 .: 5
Command Rate (CMD) ................ 0 .: 2
>>>>> Channel A
Channel A Timing Setting ..............: [Press Enter]
Static tRead Value ............... auto .: 9
tRD Phase0 Adjustment ............. 0 .: Auto -
tRD Phase1 Adjustment ............. 0..: Auto -
tRD Phase2 Adjustment ............. 0..: Auto -
tRD Phase3 Adjustment ............. 0..: Auto -
Trd2rd(Different Rank) ............ .: Auto -
Twr2wr(Different Rank) ............ .: Auto -
Twr2rd(Different Rank) ............ .: Auto -
Trd2wr(Same/Diff Rank) ............ .: Auto -
Dimm1 Clock Skew Control ..............: Auto -
Dimm2 Clock Skew Control ..............: Auto -
DDR Write Training ....................: Auto -
>>>>>> Channel A
Channel A Driving Settings ............: [Press Enter]
Driving Strength Profile ..............: 1066
Data Driving Pull-up Level ............: Auto -
Cmd Driving Pull-up Level .............: Auto -
Ctrl Driving Pull-up Level ............: Auto -
Clk Driving Pull-up Level .............: Auto -
Data Driving Pull-Down Level ..........: Auto -
Cmd Driving Pull-Down Level ...........: Auto -
Ctrl Driving Pull-Down Level ............: Auto -
Clk Driving Pull-Down Level .............: Auto -
**** Channel B Timing Setting ****
Static tRead Value ............... 9
tRD Phase0 Adjustment ............. 0 .: Auto -
tRD Phase1 Adjustment ............. 0 .: Auto -
tRD Phase2 Adjustment ............. 0 .: Auto -
tRD Phase3 Adjustment ............. 0 .: Auto -
Trd2rd(Different Rank) ............ 8 .: Auto -
Twr2wr(Different Rank) ............ 8 .: Auto -
Twr2rd(Different Rank) ............ 7 .: Auto -
Trd2wr(Same/Diff Rank) ............ 9 .: Auto -
Dimm1 Clock Skew Control ..............: Auto -
Dimm2 Clock Skew Control ..............: Auto -
DDR Write Training .........................: Auto -
>>>>> Channel B
Channel B Driving Settings ............: [Press Enter]
Driving Strength Profile ..............: 1066
Data Driving Pull-up Level ............: Auto -
Cmd Driving Pull-up Level .............: Auto -
Ctrl Driving Pull-up Level ..............: Auto -
Clk Driving Pull-up Level ...............: Auto -
Data Driving Pull-Down Level ..........: Auto -
Cmd Driving Pull-Down Level ...........: Auto -
Ctrl Driving Pull-Down Level ............: Auto -
Clk Driving Pull-Down Level .............: Auto -
*****Motherboard Voltage Control*****
Voltage Type.............Normal .......: [Current]
>>>CPU
CPU Vcore ............. 1.2700V ......: [1.400V]
CPU Termination ....... 1.200V ........: [1.48V]
CPU PLL ............... 1.500V ........: [1.65V]
CPU Reference ......... 0.760V ........: [Auto]
>>> MCH/ICH
MCH Core .............. 1.100V ........: [1.340V]
MCH Reference ......... 0.760V ........: [Auto]
MCH/DRAM Ref .......... 0.900V ........: [Auto]
ICH I/O ............... 1.500V ........: [1.570V]
ICH Core .............. 1.100V ........: [1.200V]
>>> DRAM
DRAM Voltage .......... 1.800V ........: [2.1V] also tried 2.00. 1.9, 2.2, 2.3
DRAM Termination ...... 0.900V ........: [Auto]
Channel A Reference ... 0.900V ........: [Auto]
Channel B Reference ... 0.900V ........: [Auto]
Advanced Settings
Password check.........................: [setup]
HD S.M.A.R.T. Capability...............: [Enabled]
CPU Multi-Threading....................: [Enabled]
Limit CPUID Max. to 3 .................: [Disabled]
No-Execute Memory Protect .............: [Enabled]
CPU Enhanced Halt (C1E) ...............: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function......................: [Disabled]
Virtualization Technology..............: [Disabled]
Delay For HDD (Secs)...................: [0]
Full screan Logo Show..................: [Enabled]
Init Display First.....................: [PEG]
Integradted Peripherals
Sata Raid/ACHI Mode....................: [Disabled]
Sata Port0-3 Native Mode...............: [Disabled]
Azalia Codec...........................: [Auto]
Green Lan..............................: [Disabled]
Smart Lan1.............................:
Smart Lan2..........................
With those figures above, my pc wont boot all the way. It booted and restart before posting.
I played with cpu vcore numbers, seem none of them will work.
Thank you.
</td></tr></tr></tbody></table>
Comment