I was just wanting to see if you could help me get alittle more mhz out of my e8400. It's at 3.6 right now. Would like to get 4.0mhz. Runs great with no problems at all right now. Here is my settings. Also here is what I have installed.
MB - ga-ep43-ds3l
Memory - 2x1gig kingston pc6400 800mhz at 1.8v
Video Card - Radeon HD 4350
Cpu cooler - Cooler Master Hyper TX
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............:turbo
CPU Clock Ratio ..........................:9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................:3.600
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........:100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control
CPU Clock Drive...........................:800
PCI Express Clock Drive.................:900
CPU Clock Skew (ps)....................:0
MCH Clock Skew (ps)...................:0
DRAM Performance Control
Performance Enhance...................: [extreme]
(G)MCH Frequency Latch...............:400
System Memory Multiplier ..............:2.00D
Memory Frequency (Mhz) ..............:800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12
Advanced Timing Control
tRRD...........................................AUT O
tWTR..........................................AUTO
tWR............................................AUT O
tRFC...........................................AUT O
tRTP...........................................AUT O
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................NA
Channel A
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:NORMAL
CPU Termination…..... 1.200V*.......:AUTO
CPU PLL…………………....1.500V*.......:AUTO
CPU Referen.…………....0.755V*.......:AUTO
CPU Reference2………,,0.800V*.......:AUTO
MCH/ICH
MCH Core…………….....1.100V...........:AUTO
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............:AUTO
ICH Core…………...……1.100V............: <<< Leave
DRAM
DRAM Voltage ……....1.800V............:AUTO
DRAM Termination .…0.900V............:
Channel A Reference 0.900V............:
Channel B Reference 0.900V............:
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
MB - ga-ep43-ds3l
Memory - 2x1gig kingston pc6400 800mhz at 1.8v
Video Card - Radeon HD 4350
Cpu cooler - Cooler Master Hyper TX
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............:turbo
CPU Clock Ratio ..........................:9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................:3.600
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........:100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control
CPU Clock Drive...........................:800
PCI Express Clock Drive.................:900
CPU Clock Skew (ps)....................:0
MCH Clock Skew (ps)...................:0
DRAM Performance Control
Performance Enhance...................: [extreme]
(G)MCH Frequency Latch...............:400
System Memory Multiplier ..............:2.00D
Memory Frequency (Mhz) ..............:800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12
Advanced Timing Control
tRRD...........................................AUT O
tWTR..........................................AUTO
tWR............................................AUT O
tRFC...........................................AUT O
tRTP...........................................AUT O
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................NA
Channel A
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:NORMAL
CPU Termination…..... 1.200V*.......:AUTO
CPU PLL…………………....1.500V*.......:AUTO
CPU Referen.…………....0.755V*.......:AUTO
CPU Reference2………,,0.800V*.......:AUTO
MCH/ICH
MCH Core…………….....1.100V...........:AUTO
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............:AUTO
ICH Core…………...……1.100V............: <<< Leave
DRAM
DRAM Voltage ……....1.800V............:AUTO
DRAM Termination .…0.900V............:
Channel A Reference 0.900V............:
Channel B Reference 0.900V............:
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
Comment