I've got my build up and running stable at stock everything.
The list of the components:
Gigabyte GA-EP45-UD3P
Intel E8500 w/ Xigmatek HDT-S1283 Fan/Heat sink (+retention bracket)
OCZ Reaper HPC 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066
Western Digital Black 640GB SATA WD6401AALS (x2)
EVGA GeForce GTX 260 Core 216 896MB
Antec P180 Mid Tower
Antec TP3 650w PSU
I have the following as my settings:
I'm just looking for a very stable OC. Learn more about OC'ing with some hands on. Been reading a bunch of things on OC'ing but don't want to start messing with the timings and voltage till I get the OK from the big boys. Any suggestions?
Thanks a lot!
The list of the components:
Gigabyte GA-EP45-UD3P
Intel E8500 w/ Xigmatek HDT-S1283 Fan/Heat sink (+retention bracket)
OCZ Reaper HPC 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066
Western Digital Black 640GB SATA WD6401AALS (x2)
EVGA GeForce GTX 260 Core 216 896MB
Antec P180 Mid Tower
Antec TP3 650w PSU
I have the following as my settings:
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: auto [URL="http://forums.tweaktown.com/"]CPU Clock[/URL] Ratio ..........................: 9x Fine CPU Clock Ratio.....................:. +0.5 CPU Frequency ...........................: 3.16GHz (333x9.5) Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 333 PCI Express Frequency (Mhz) .........:100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 700mv PCI Express Clock Drive.................: 700mv CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)...................: 0ps DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Auto (G)MCH Frequency Latch...............: Auto System Memory Multiplier ..............: Auto Memory Frequency (Mhz) ..............: 1066 1066 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................5 tRCD .........................................5 tRP'...........................................5 tRAS..........................................15 Advanced Timing Control tRRD...........................................4 [Auto] tWTR..........................................4 [Auto] tWR............................................6 [Auto] tRFC...........................................72 [Auto] tRTP...........................................4 [Auto] Command Rate (CMD) ....................:0 [Auto] Driving Strength Profiles Driving Strength ............................ Channel A <<<<<<<< ALL AUTO Static tRead Value.........................:8 tRD Phase0 Adjustment...................:0 tRD Phase1 Adjustment...................:0 tRD Phase2 Adjustment .................:0 tRD Phase3 Adjustment..................:0 Trd2rd(Different Rank)....................:8 Twr2wr(Different Rank)...................:8 Twr2rd(Different Rank)...................7 Trd2wr(Same/Diff Rank)..................:9 Dimm1 Clock Skew Control...............:Auto Dimm2 Clock Skew Control...............:Auto Channel B Static tRead Value.........................:8 tRD Phase0 Adjustment...................:0 tRD Phase1 Adjustment...................:0 tRD Phase2 Adjustment .................:0 tRD Phase3 Adjustment..................:0 Trd2rd(Different Rank)....................:8 Twr2wr(Different Rank)...................:8 Twr2rd(Different Rank)...................:7 Trd2wr(Same/Diff Rank)..................:9 Dimm1 Clock Skew Control...............:Auto Dimm2 Clock Skew Control...............:Auto Motherboard Voltage Control CPU Load-line Calibration ....................: [Enabled] CPU Vcore�.���.........................:1.25000V [Auto] CPU Termination�..... 1.200v....... [Auto] CPU PLL�������....1.500v....... [Auto] CPU Referen.����....0.760v....... [Auto] MCH/ICH MCH Core�����.....1.100v........... [Auto] MCH Reference�.��.0.760........... [Auto] MCH/DRAM Ref.�......0.900V........... [Auto] ICH I/O������.....1.500V............ [Auto] ICH Core����...��1.100V............ [Auto] DRAM DRAM Voltage ��....1.800v............ [Auto] DRAM Termination .�0.900V............ [Auto] Channel A Reference 0.900V............ [Auto] Channel B Reference 0.900V............ [Auto] Advanced Settings HDD SMART Capability................... [Enabled] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Enabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Enabled] [URL="http://forums.tweaktown.com/"]Virtualization[/URL] Technology................: [Enabled]
Thanks a lot!
Comment