<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
<o:p></o:p>
Any advice about any settings or timings that would let me get more performance would be welcome
<o:p></o:p>
<o:p></o:p>
Gigabyte EP-45-DS3R (F10 bios)
Intel 2 Duo E8500
OCZ Reaper HPC 4GB (4 x 1GB) DDR2 1150 (PC2 9200) Model OCZ2RPR11502GK <o:p></o:p>
Rosewill RCX-Z775-EX cooler
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ..................: [Auto]
CPU Clock Ratio ..............................: 9
Fine CPU Clock Ratio.........................: [+0.5]
CPU Frequency ...............................: 3.85Ghz (406 FSB x 9)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control...................: [Enabled]
CPU Host Frequency (Mhz) .............: [406]
PCI Express Frequency (Mhz) ..........: [100]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800
PCI Express Clock Drive.................: 900
CPU Clock Skew ....................: 50
MCH Clock Skew ....................: 150
DRAM Performance Control
Performance Enhance....................: [STANDARD]
Extreme Memory Profile (X.M.P.)........: Disabled
(G)MCH Frequency Latch.................: [400MHz]
System Memory Multiplier ..............: [2.66D]
Memory Frequency (Mhz) ................: 1083
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time..........................:5
tRCD ...........................................:5
tRP'.............................................: 5
tRAS............................................:1 5
Advanced Timing Control
tRRD............................................:4 Auto
tWTR.......................................... :4 Auto
tWR.............................................:8 Auto
tRFC............................................:5 6 Auto
tRTP...........................................:4 Auto
Command Rate (CMD) ....................:0 Auto
Channel A & B match
Channel A
Static tRead Value.........................10
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto
Motherboard Voltage Control
CPU
MCH/ICH
DRAM
Channel A Reference 0.900V............: Auto
Channel B Reference 0.900V............: Auto
Advanced Settings
Limit CPUID Max. to 3.....................: disabled
No-Execute Memory Protect............:enabled
CPU Enhanced Halt (C1E)................: disabled
CPU Thermal Monitor 2(TM2) ...........: enabled
CPU EIST Function.........................: disabled
Virtualization Technology................: enabled <o:p></o:p>
<o:p></o:p>
<o:p></o:p>
Thanks for any help