No announcement yet.

EP45-DS4P new build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • EP45-DS4P new build

    Hi, this is my first post on here but I have been reading the forum for a couple of months. This is the Intel machine I've had since a 586 so TT has really helped bring me up to date (?).
    At this stage I've gone as far as I can go by myself so any advice would be appreciated. Specs:-
    EP45P-DS4P (F7)
    E7200
    Xigmatek sd964 hsf
    2x1g OCZ2N800SR2GK
    (OCZ Technology | Products | Memory | OCZ DDR2 PC2-6400 SLI-Ready Edition Dual Channel)
    7300GT
    Antec Trio 430
    Samsung 160Gig sata
    Maxtor 160Gig ide
    Asus dvd burner
    Lennovo dvd/cd combo
    CM Elite case

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: auto
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:.
    CPU Frequency ...........................: 3.2


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]

    Driving Strength Profiles
    Driving Strength ............................800

    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:<<< Leave for all below as well
    tRD Phase1 Adjustment..........0.........:Auto
    tRD Phase2 Adjustment ..........0.......:Auto
    tRD Phase3 Adjustment.........0.........:Auto
    Trd2rd(Different Rank).............0.......:Auto
    Twr2wr(Different Rank)...........6........:Auto
    Twr2rd(Different Rank).............6......:Auto
    Trd2wr(Same/Diff Rank)...........5.......:Auto
    Dimm1 Clock Skew Control..........8.....:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:8
    tRD Phase0 Adjustment..........0.........:<<< Leave for all below as well
    tRD Phase1 Adjustment..........0.........:Auto
    tRD Phase2 Adjustment ..........0.......:Auto
    tRD Phase3 Adjustment........0..........:Auto
    Trd2rd(Different Rank)............6........:Auto
    Twr2wr(Different Rank)..........6.........:Auto
    Twr2rd(Different Rank)............5.......:Auto
    Trd2wr(Same/Diff Rank)..........8........:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mv
    PCI Express Clock Drive.................: 900mv
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 50


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: 400Mhz
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................5
    tWR............................................6
    tRFC...........................................42
    tRTP...........................................5
    Command Rate (CMD) ....................:2


    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: N/A
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….………......1.1125...................:1.1375
    CPU Termination…..... 1.200V*.......: <<< 1.3
    CPU PLL…………………....1.500V*.......: << 1.5
    CPU Referen.…………....0.76V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.14
    MCH Reference….…….0.760V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< 1.5
    ICH Core…………...……1.100V............: <<< 1.14

    DRAM
    DRAM Voltage ……....1.800V............:2.0
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Everest gives read/write/copy figures at 7580/8498/8101 MB/s & latency at 66.6 ns.

    The oc I'm happy with at this time of year (hot) but I was wondering if I could squeeze anything worthwhile out of the ram?

    Thanks to all on this forum especially Lsdmeasap for your help and I hope to give some back.
Working...
X