<o:p> </o:p>
But, of course, I still have a question of my own. J<o:p></o:p>
<o:p> </o:p>
Below are my system specs:<o:p></o:p>
<o:p> </o:p>
GA-EP45-UD3P motherboard (will be using onboard sound, not a discrete card)<o:p></o:p>
VGA Sapphire Radeon HD4850 512MB video card<o:p></o:p>
Intel Q8200 processor (with stock heat sink)<o:p></o:p>
8 gig (4x2GB) Mushkin model 996580 DDR2 800 (PC2 6200) ram (timing 4-4-4-12, Voltage 2.0V - 2.1V)<o:p></o:p>
2 Samsung 22x DVD burners (model SH-S223F)<o:p></o:p>
Corsair 750 watt PSU (750TX)<o:p></o:p>
Cooler Master 690 case<o:p></o:p>
Windows Vista 64bit (not yet installed as of this post)<o:p></o:p>
<o:p> </o:p>
I don't intend to overclock, I just want to get it running. I've got all the hardware installed, but wanted to know: Is there anything I need to do/know before I power it up for the first time?<o:p></o:p>
<o:p> </o:p>
Should I just leave the bios alone and wait for a problem, or do I need to flash to a new one straight away?<o:p></o:p>
<o:p> </o:p>
I asked about RAM before I made my purchases and was given some advice and also some bios adjustments in this post here, http://forums.tweaktown.com/f69/ga-ep45-ud3p-mushkin-ram-question-28656/ After re-reading it, I see that I should remove some of the RAM before going into the bios. Ah well, I got carried away just getting the stuff all installed inside the case.<o:p></o:p>
<o:p> </o:p>
<o:p> </o:p>
<o:p> </o:p>
<o:p> </o:p>
<o:p> </o:p>
Thank you for any advice, help, or tips anyone may have.
Linda
Comment