Hello!!! Can you help me?? Please!!
I have 4x1gb A-Data Vitesta Extreme 800 + CL4 DDRII on P35-DS4 rev 2.0
If I select in bios at DDR2 Overvoltage +0.25 v, PCHealth Status, Everest, Speedfan, EasyTune and other programs say they are monitoring me to 2,01 v. should be 2,05v
DDR2 Ovevoltage +0,05 -----> Vdimm does not change
DDR2 Overvoltage +0.30 ----> 2,06v should be 2,1v
DDR2 Overvoltage +0.35 ----> 2,11v should be 2,15v
Only if I select +0,4v, the motherboard provided to the memory 2,21v. Only +0,4v is OK
All values below +0.4 do not provide a proper voltage.
The motherboard is not supplying the correct voltage.
Now I have selected +0.35 v at bios and motherboard provided to the memory 2,11v
Bios F13, F14a and F14c. None of them solved the problem
C2D E8500 rev E0
4x1gb A-Data Vitesta Extreme Edition 800+
P35-DS4 rev 2.0
XFX 8800GT 625M 512mb
Corsair VX550
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [9]
Fine Clock Ratio ____________[0.0]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [400]
PCI Express Frequency (Mhz)_______ [101]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Turbo]
SPD Manual
CAS Latency Time________________ 5 --- 4
Dram RAS# to CAS# Delay_________ 5 --- 4
Dram RAS# Precharge Delay_______ 5 --- 4
Precharge Delay (tRAS)__________ 15 --- 12
ACT to ACT Delay (tRRD)_________ 3 --- [Auto]
Rank Write to READ Delay________ 3 --- [Auto]
Write to Precharge Delay_________ 6 --- [Auto]
Refresh to ACT Delay_____________ 42 --- [Auto]
Read to Precharge Delay__________ 3 --- [Auto]
Static tRead Value_______________ 7 --- [Auto]
Static tRead Phase Adjust________ 0 --- [Auto]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.35V]--->2,11v
PCI-E OverVoltage Control_ [+0.05V]
FSB OverVoltage Control___ [+0.10V]
(G)MCH OverVoltage Control [+0.150V]
Load Line Calibration_____ [Enabled]
CPU Voltage Control_______ [1.19375]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Thank you!!!
I have 4x1gb A-Data Vitesta Extreme 800 + CL4 DDRII on P35-DS4 rev 2.0
If I select in bios at DDR2 Overvoltage +0.25 v, PCHealth Status, Everest, Speedfan, EasyTune and other programs say they are monitoring me to 2,01 v. should be 2,05v
DDR2 Ovevoltage +0,05 -----> Vdimm does not change
DDR2 Overvoltage +0.30 ----> 2,06v should be 2,1v
DDR2 Overvoltage +0.35 ----> 2,11v should be 2,15v
Only if I select +0,4v, the motherboard provided to the memory 2,21v. Only +0,4v is OK
All values below +0.4 do not provide a proper voltage.
The motherboard is not supplying the correct voltage.
Now I have selected +0.35 v at bios and motherboard provided to the memory 2,11v
Bios F13, F14a and F14c. None of them solved the problem
C2D E8500 rev E0
4x1gb A-Data Vitesta Extreme Edition 800+
P35-DS4 rev 2.0
XFX 8800GT 625M 512mb
Corsair VX550
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [9]
Fine Clock Ratio ____________[0.0]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [400]
PCI Express Frequency (Mhz)_______ [101]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Turbo]
SPD Manual
CAS Latency Time________________ 5 --- 4
Dram RAS# to CAS# Delay_________ 5 --- 4
Dram RAS# Precharge Delay_______ 5 --- 4
Precharge Delay (tRAS)__________ 15 --- 12
ACT to ACT Delay (tRRD)_________ 3 --- [Auto]
Rank Write to READ Delay________ 3 --- [Auto]
Write to Precharge Delay_________ 6 --- [Auto]
Refresh to ACT Delay_____________ 42 --- [Auto]
Read to Precharge Delay__________ 3 --- [Auto]
Static tRead Value_______________ 7 --- [Auto]
Static tRead Phase Adjust________ 0 --- [Auto]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.35V]--->2,11v
PCI-E OverVoltage Control_ [+0.05V]
FSB OverVoltage Control___ [+0.10V]
(G)MCH OverVoltage Control [+0.150V]
Load Line Calibration_____ [Enabled]
CPU Voltage Control_______ [1.19375]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Thank you!!!
Comment