Setup:
GA-EX58-UD5
6GB (3x2GB) OCZ 1033 DDR3
Intel i7 920
Problem:
I'm trying to simply install Vista x64 onto a SATA drive. Vista can't see any of my SATA drives, so I try the "load driver" during installation and neither of the Intel or Gigabyte SATA installation drivers work. In both cases, they do not show up as compatible and if I select them manually it complains about them not being signed and allowed.
Thoughts:
* I can successfully install Vista x64 to an IDE drive with no problem.
* I've made sure that the HDD controller are set to IDE and native mode.
Any thoughts and/or recommendations would be appreciated. I would really prefer not to run the OS from an IDE drive. (Oh, and the SATA drives show up fine once Vista is installed ... )
Sincerely,
Mike
GA-EX58-UD5
6GB (3x2GB) OCZ 1033 DDR3
Intel i7 920
Problem:
I'm trying to simply install Vista x64 onto a SATA drive. Vista can't see any of my SATA drives, so I try the "load driver" during installation and neither of the Intel or Gigabyte SATA installation drivers work. In both cases, they do not show up as compatible and if I select them manually it complains about them not being signed and allowed.
Thoughts:
* I can successfully install Vista x64 to an IDE drive with no problem.
* I've made sure that the HDD controller are set to IDE and native mode.
Any thoughts and/or recommendations would be appreciated. I would really prefer not to run the OS from an IDE drive. (Oh, and the SATA drives show up fine once Vista is installed ... )
Sincerely,
Mike
Comment