If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i put the new bios f13f, it seems to have solved all the problems for me, ITE device and BT, but i still wait a week before i'm sure
i have 5800X + B550i Aorus Pro + 32 gb 3600
Maybe it's a coincidence but after install F13f to B550 AORUS ELITE AX V2 bluetooth dies twice a day as once recently with F11-F12 (full power off to make it work again required)... F13a-f13e almost no problems with it, also R7 5800x required little more CPU voltage for stable work - F13e 1.208v and F13f 1.220v to Pass Aida64 FP64 Ray-trace with frequence locked at 4.6GHz... Rolled back to F13e
Something interesting... with new F13g Aida64 FP64 Ray-trace Pass at 1.202v :)
i put the new bios f13f, it seems to have solved all the problems for me, ITE device and BT, but i still wait a week before i'm sure
i have 5800X + B550i Aorus Pro + 32 gb 3600
The ITE device 'set address' error would be immediately obvious - the error occurs on every reboot but never on resume from hibernate
The BT problem is fairly random so a couple of weeks at least is needed and even then I'd be really surprised if a BIOS change makes any difference.
Having the Intel device disabled to use a BT USB dongle stops it disappearing - but as a the USB dongle is so cheap its not worth the hassle of using the Intel device.
Its easy to forget to put back previous settings after updating BIOS like disabling CSM so there's always lot of reports of changes whenever any BIOS or firmware update takes place.
There's also changes triggered by unplugging the power - my B550i changes its mind between showing BIOS screen or just going straight to Windows boot screen for example.
Anyone know if there is a way to customise the fan curve of the PCH fan? It is the loudest thing in my PC by far and with a 5900x, the chipset goes over 60 degrees most of the time to turn the fan on.
EDIT: sorry forgot to mention for x570 Aorus Master
Anyone know if there is a way to customise the fan curve of the PCH fan? It is the loudest thing in my PC by far and with a 5900x, the chipset goes over 60 degrees most of the time to turn the fan on.
....not that I'm aware - but I'd really love to know why it's needed as I don't think I use any devices through the chipset, only through the cpu. Anyone here know why the chipset heats up to stupid levels (it could be that my 3090 sits right over it )
Anyone know if there is a way to customise the fan curve of the PCH fan? It is the loudest thing in my PC by far and with a 5900x, the chipset goes over 60 degrees most of the time to turn the fan on.
EDIT: sorry forgot to mention for x570 Aorus Master
Honestly -- I think the next thing to do would be to replace the built-in thermal interface between the chipset and the HSF... I'm contemplating doing that and maybe the thermal pads on the VRMs
Anyone know if there is a way to customise the fan curve of the PCH fan? It is the loudest thing in my PC by far and with a 5900x, the chipset goes over 60 degrees most of the time to turn the fan on.
EDIT: sorry forgot to mention for x570 Aorus Master
Is there some reason you aren't using the GB Utility that comes with the mboard, SIV? I've been using it for well over a year and it works well--the settings automatically override the fan settings in the bios--I don't bother with bios fan curves--ugh. It runs in Windows startup every time you boot your machine and can be controlled from the systray. It's surprising how many posts I see in which people who own these nice mboards (I also have an x570 Master) are oblivious to SIV, a very useful piece of software, actually.
Is there some reason you aren't using the GB Utility that comes with the mboard, SIV? I've been using it for well over a year and it works well--the settings automatically override the fan settings in the bios--I don't bother with bios fan curves--ugh. It runs in Windows startup every time you boot your machine and can be controlled from the systray. It's surprising how many posts I see in which people who own these nice mboards (I also have an x570 Master) are oblivious to SIV, a very useful piece of software, actually.
I don't believe you can adjust the PCH (chipset) fan curve with SIV. I use SIV, and I don't see that option anywhere.
Is there some reason you aren't using the GB Utility that comes with the mboard, SIV? I've been using it for well over a year and it works well--the settings automatically override the fan settings in the bios--I don't bother with bios fan curves--ugh. It runs in Windows startup every time you boot your machine and can be controlled from the systray. It's surprising how many posts I see in which people who own these nice mboards (I also have an x570 Master) are oblivious to SIV, a very useful piece of software, actually.
SIV turned out to be hot garbage for me, it wouldnt control the fans half the time.
Also after one of the recent BIOS releases for the Master at least fan 5 and 6 dont even register as turning in the software but do in the BIOS (reinstalled, reset and recalibrated (calibration spins them up but still 0 RPM)
I think most of the gigabyte software has an issue half the time, I start RGB fusion 2.0 and it kills the NVME SATA drive until a restart lol (io reset or something in the event viewer)
I upgraded my X570 Aorus Ultra rev 1.0 to F33h today. The flash worked fine. I loaded optimized defaults, enabled XMP (3600), set PCIe to Gen 3, disabled CSM, and saved out. My PC would not POST. After a couple of failed attempts, it automatically reset CMOS. I then set the same settings (XMP, PCIe Gen, CSM), and it worked fine. I'm not sure why it would behave this way, but the PC seems to be running fine.
Anyone know if there is a way to customise the fan curve of the PCH fan? It is the loudest thing in my PC by far and with a 5900x, the chipset goes over 60 degrees most of the time to turn the fan on.
EDIT: sorry forgot to mention for x570 Aorus Master
Comment