Originally posted by William Jarvis
View Post
Announcement
Collapse
No announcement yet.
GIGABYTE Latest Beta BIOS
Collapse
This is a sticky topic.
X
X
-
Originally posted by William Jarvis View PostTrying to install the new beta on my B550i. Currently on F11o and trying to update to f12 but it wont recognise the file. I just need to place the B550IAORUSPROAX.F12a.7z file on the root memory stick and thats it correct? I'm sure thats what I did last time!
Memory stick is 32GB and FAT32. It recognises older firmwares. Any suggestions?
You need to extract the .7z file with 7-zip. It is currently compressed and that is why it is not recognized.
Comment
-
Originally posted by Dyse View PostMemory Rtl and iol training not working properly with Z390 AORUS Master - F11m bios with speed 4000MHz and beyond and values cannot been set manually. It doesn't work any of the bios versions and I haven't seen any proof it works on any Gigabytes z390 or z490 boards. Maybe Gigabyte should look how it was done in their Z170X-SOC Force board bios version x14b or x08. Here is link how good rtl and iol values were possible with Z170X-SOC Force board memory clocks over 4000MHz
https://community.hwbot.org/topic/14...comment-465345
Comment
-
Originally posted by William Jarvis View PostTrying to install the new beta on my B550i. Currently on F11o and trying to update to f12 but it wont recognise the file. I just need to place the B550IAORUSPROAX.F12a.7z file on the root memory stick and thats it correct? I'm sure thats what I did last time!
Memory stick is 32GB and FAT32. It recognises older firmwares. Any suggestions?
If you want to use the cpu-less Q-flash plus, you also need to rename the binary inside to gigabyte.bin
Comment
-
Originally posted by William Jarvis View PostTrying to install the new beta on my B550i. Currently on F11o and trying to update to f12 but it wont recognise the file. I just need to place the B550IAORUSPROAX.F12a.7z file on the root memory stick and thats it correct? I'm sure thats what I did last time!
Memory stick is 32GB and FAT32. It recognises older firmwares. Any suggestions?
Comment
-
Originally posted by Dyse View PostMemory Rtl and iol training not working properly with Z390 AORUS Master - F11m bios with speed 4000MHz and beyond and values cannot been set manually. It doesn't work any of the bios versions and I haven't seen any proof it works on any Gigabytes z390 or z490 boards. Maybe Gigabyte should look how it was done in their Z170X-SOC Force board bios version x14b or x08. Here is link how good rtl and iol values were possible with Z170X-SOC Force board memory clocks over 4000MHz
https://community.hwbot.org/topic/14...comment-465345
I'M ALSO WAITING FOR THEM TO FINALLY roll out a new beta For Z390 MASTER, ADD THE RTL INIT and IOL offset OPTIONS
Why when overclocking 3600 I have Iol 13/14 on Gigabit, When on Asrock I have 7/7 - with the same timings, RAM KIT and board topology.
The voltage is more than enough, the timings are set according to Jedec and Anta777 tables.
The board on Asrock PGX trainING MEMORY 7/7, but the Gigabyte can not. Same CPU- SAME Memory controller - but on ASrock Iol 7/7 like should (((
Maybe in gigabit they will add some more options to the beta bios for tuning and better training?
Comment
-
Originally posted by stasio View PostX570 series.......F32aLast edited by stasio; 01-14-2021, 07:29 PM.
Comment
-
Originally posted by William Jarvis View PostTrying to install the new beta on my B550i. Currently on F11o and trying to update to f12 but it wont recognise the file. I just need to place the B550IAORUSPROAX.F12a.7z file on the root memory stick and thats it correct? I'm sure thats what I did last time!
Memory stick is 32GB and FAT32. It recognises older firmwares. Any suggestions?
Comment
-
Originally posted by stasio View Post
- Agesa 1.1.9.0 finish validation, BIOS will be compile shortly
- Agesa 1.2.0.0 under validation,issues with USB's and others
Comment
-
stasio are there any news in regard of the TRX40 platform? I am especially talking about the resizable BAR support which has popped up in a few beta TRX40 bioses from other vendor lately...
Thanks and keep up the good work... watching these threads since forever but decided to sign up to ask this particular question...
- Likes 1
Comment
-
Originally posted by PrEzi View Poststasio are there any news in regard of the TRX40 platform? I am especially talking about the resizable BAR support which has popped up in a few beta TRX40 bioses from other vendor lately...
Thanks and keep up the good work... watching these threads since forever but decided to sign up to ask this particular question...
- Likes 2
Comment
-
-
But 1.1.9.0 are still coming? :D ????
(sigh, why are emojis showing just question marks? Makes so many posts look aggressive :( I wish they would fix emojis on this forum. And why does it work for some people but not others? q.q stasio what is your secret?)
Comment
-
Originally posted by boredman View PostDr.PaWel I'll try that. Thanks.
GuzLightyear Which BIOS version is this? Has anyone tried the latest BIOS updates? Specifically for the B550I Aorus Pro Ax?
Comment
-
Originally posted by stasio View PostAccording some reporting that latest upload is with Agesa 1.2.0.0 (I get wrong info) ,they asked me to delete all links.
This BIOS's are still in testing and not to be used ,atm.
Sorry guys, I will delete all links.
Comment
Comment