If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thanks a million! I've been losing my mind getting this thing to work stable. Running tests right now, looks promising! Will report back after testing it some more.
For those who are interested, I am on:
Ryzen 7 5800x
B550m Aorus Pro
Patriot Viper Steel 4000mhz, running 1800flck//3600mhz at 14-14-14-32
X570 Aorus Xtreme, 5950X, F31n no more whea (really 0).
Mem 3800Mt/s, FCLK 1900Mhz, vSOC 1.050, VDDG 1.000, Curve opt -10 all core
Anything above 1900+ FCLK will not post, I would say it's soft problem, because my mem can go up to 4400Mt/s. Even if vSOC and VDDG are increase, it doesn't change => no post.
That's why I strongly believe it's a soft wall bug/error/what ever.
Next update.....same changes but the ABL with high fclk.
Nice, very pleased with the pace of the updates. I am finding f11i very stable, but cant fclk above 1900mhz. But with f11k I can fclk up to 2067mhz but its not stable past 1600mhz fclk. I am hoping to see a new BIOS that is both stable and has the 1900mhz fclk wall removed.
Any ETA on the next BIOS? The one I am quoting you on here (f11m) does not include the fclk changes yes?
Hi stasio,
when can we expect a beta version with (AMD) SAM support for Intel Z490 motherboards? (for example GB Z490M Gaming X)
as other brand already have beta bios ready.
There is currently only option to enable Above 4G Decoding, Re-Size BAR Support is not present.
Nice, very pleased with the pace of the updates. I am finding f11i very stable, but cant fclk above 1900mhz. But with f11k I can fclk up to 2067mhz but its not stable past 1600mhz fclk. I am hoping to see a new BIOS that is both stable and has the 1900mhz fclk wall removed.
Any ETA on the next BIOS? The one I am quoting you on here (f11m) does not include the fclk changes yes?
Tried F31n and can't get it to boot anything higher than IF1900, tried different voltages, but still nothing. With older bioses I can get 5900x to windows IF2100 and IF2033 was stable, but with WHEA errors. So i'm back in F31L.
Looked those WHEA errors what keep poping up with IF2000
They come always after exactly 2 minutes and there will be exactly 101 errors each time.
I shut down diagnostic policy service and Event viewer after that stopped logging whea errors, but they still pop up HWinfo. Can't find any information where HWinfo gets WHEA information. One option is that logger only checks every 2 minutes. But before shutting diagnostic policy down, they pop up in Event viewer also every 2 minutes. Even if I made F5 refresh, they come 2 minutes intervals. After that I disabled all USB(even mouse and keyboard), wifi, etc what i can find in BIOS and windows, but errors still pops up.
So mybe somebody knows what windows or motherboard checks every 2 minutes and find out what causes WHEA. I have tried 2 different windows and result is same. https://www.overclock.net/cdn-cgi/im...s-jpg.2467527/
Hi stasio,
when can we expect a beta version with (AMD) SAM support for Intel Z490 motherboards? (for example GB Z490M Gaming X)
as other brand already have beta bios ready.
There is currently only option to enable Above 4G Decoding, Re-Size BAR Support is not present.
Hi stasio, do you have any information if we can expect Re-Size BAR Support in future bios(es)?
I'm not begging for it, just wondering if adding SAM support is planned. https://videocardz.com/newz/amd-rade...le-bar-enabled
UPDATE: I was able to run 3933cl16 stable using mixed RAM kits (Micron Rev E and Hynix CJR) with 1967 FCLK. No crashes No BSOD No sound distortion, just usb 2.0 headers are bugged. Find the timings below,
Games are more consistent in FPS now and I'm definitely seeing improvements in the 0.1 and 1% low FPS. I think we can recommend dual rank sticks over single rank now.
Comment