GIGABYTE Latest Beta BIOS

[stasio]

BIOS update....

Z590 series.....
stable version on first page

- Enhance the compatibility of M.2 device
- Date 06/18/2021

[Montano5]

stasio : Thank you for the updates. I tried to download the F35a for the AORUS x570 Elite but the extract of the zip file only gives two files that are not the bios... Seems the file is corrupted or something.

[Azomiss]

stasio : Wanted to say Hi and to thank you for all the great work!

[stasio]

stasio : Thank you for the updates. I tried to download the F35a for the AORUS x570 Elite but the extract of the zip file only gives two files that are not the bios... Seems the file is corrupted or something.

Pure BIOS file is uploaded (no zip......no rar file).
From where you get zip file?

[Montano5]

Pure BIOS file is uploaded (no zip......no rar file).
From where you get zip file?

I'm sorry, not fully woke up I used 7zip to extract the raw bios file as it was display with a zip icon... -.-'
You're right, all is good. Excuse me again...

[HaiKarate]

F13j....
https://www.mediafire.com/file/z416b...H.F13j.7z/file

Thank you, mystical BIOS wizard!

[lowmotion]

B550i PRO AX F13k runs fine.

No problems yet.

- USB mouse runs at 7700/8000hz
- USB keyboard runs at 8000hz
- USB soundcard still has a usb bug on cold boot (not gigabyte related)
- USB 8x hub runs fine.

Legacy = off, xhci = on, c-states=on

F13i (last one?) had problems with xhci/legacy and setting mouse polling rate above 1000hz.


Does anyone know the trick about USB and safe mode to prevent the error "not recognized on cold boot"?

[Breach]

New Beta BIOS.....


B550 series

- Agesa 1.2.0.3a
- Date 06/17/2021
(supose to address USB issue)

Thanks, updated. Unfortunately, still keyboard lag/disconnects when keyboard connected to USB 2.0 and under full load... :-( I guess I'll just forget about USB 2.0, luckily for me I have enough USB 3.x ports...

[Kbird]

Massive stability issues with this bios. Using the same settings I used on f5d, PC wouldn't last a few minutes in windows without BSOD or hard resetting. (manually entered, not loaded. I find loading any saved profile does not work at all on this board.) VR VOUT would jump all over the place. I'm guessing the voltage fluctuations were the cause of the instability, but that's simply a guess.

I tried the beta bios, because even the F5D tries to overvolt almost everything attached to the board. VCCSA over 1.35, VCORE over 1.5, VR VOUT hitting 1.585. VCCIO over 1.4... This was all with doing a full clear cmos via jumper, entering bios, loading xmp, Disabling turbo enhancement, restarting. I'm using 3600mhz Ballistix (4 sticks x 16gb), so it isn't exotic ram with a craxy xmp profile. Trying to get my 11900k to run close to stock intel specs is near impossible. I'm using it in a server, so I'd prefer stability vs overclocking.

F5e has been the most stable for me so far but I have not tried the Final F5 Bios on page 1 here as it apparently has the NVME as Ejectable issue like F5d and F5f had

https://forum.gigabyte.us/post/56890

[Marucins]

What does it change AGESA 1.2.0.3A?

Where to look for this information?

[jwsg]

AMD were happy to confirm they were looking at USB issues and wanted people who had experienced them - like audio drop outs etc - to help them verify the changes. Its difficult because everyone has different devices and some problem they blame on BIOS.

But they wont detail what they found. Although AMD (like Nvidia and Intel) do provide change logs they;re not that detailed and dont say what the AGESA changes fix.

We've learnt that 1.2.0.2 was withdrawn for B550 and we can guess that 1.2.0.3A fixes something for some people's systems.

GB BIOS change notes talk about USB 2.0 devices - not ports as some boards dont even have USB 2.0 ports these days.

[cyberloner]

Thanks, updated. Unfortunately, still keyboard lag/disconnects when keyboard connected to USB 2.0 and under full load... :-( I guess I'll just forget about USB 2.0, luckily for me I have enough USB 3.x ports...

usb 2.0 is fixed for me with this beta 1.2.0.3a ....... no more dc with b550 aorus pro ac
only the curve optimizer 24 hours stable before is not stable again with beta....

[Anantha RamaKrishnan]

usb 2.0 is fixed for me with this beta 1.2.0.3a ....... no more dc with b550 aorus pro ac
only the curve optimizer 24 hours stable before is not stable again with beta....

Hey! I have the same exact setup, Hows your gaming / performance after updating AGESA 1.2.0.3 Patch A?

because ifter flashing 1.2.0.3 A my benchmark values have gone heavily downhill! and crashes are occuring every 5-10 minutes

i am currently playing CONTROL 2019 and it crashed like 20 times yesterday causing PC to reboot everytime, but after re-flashing F123J i have been gaming all day today and not a single crash!

If you are able pls do check the performace / gaming on 1.2.0.3 A

[baldersz]

i am currently playing CONTROL 2019 and it crashed like 20 times yesterday causing PC to reboot everytime, but after re-flashing F123J i have been gaming all day today and not a single crash!

What happens when you get a crash? I have found playing L4D2 that sometimes my PC will hard crash - all USB ports stop working and lose power, and my monitors turn off (but my PC remains on) - the only option is to hard power off and then on again. I am running F13i and I'm hoping it's a bug with this BIOS version

[cyberloner]

Hey! I have the same exact setup, Hows your gaming / performance after updating AGESA 1.2.0.3 Patch A?

because ifter flashing 1.2.0.3 A my benchmark values have gone heavily downhill! and crashes are occuring every 5-10 minutes

i am currently playing CONTROL 2019 and it crashed like 20 times yesterday causing PC to reboot everytime, but after re-flashing F123J i have been gaming all day today and not a single crash!

If you are able pls do check the performace / gaming on 1.2.0.3 A

i tweak pbo with corecycler to get rid of whea error while gaming .... before
after update 1.2.0.3a i get whea error restart again... i am finding the error with corecycler again and tweaking for stability....
cpu sudden boost with not enough power provide to it is causing the error from what i i think...... manual oc cannot get the pbo and boost benchmark speed with air cooling here ... so tweaking pbo2 for stability is my best option....