GIGABYTE Latest Beta BIOS

[maceh]

I can ask for the last version of Bios to Aorus Xtreme X570 with AGESA 1.2.0.0
I do not want 1.2.0.1 but I need it to be there 1.2.0.0

Thanks.

News from 1.2.0.2 are fix issue in USB connections but 1.2.0.1 A too include this fix

[d00f]

Hi,

yesterday I installed my new Hardware:
Z590 Gaming X - Bios F2 out of the box
11700KF

MSI 3070 Gaming X Trio (rBar Bios installed)
64GB DDR4 3200/CL14
Creative X-FI

With BIOS F2 system boots, any newer BIOS result in a boot loop. Tried F3, F4b, F4c.
Post Code LED stuck at VGA und then shuts down.
Back to F2 I can boot again.

Are ther any known problems related to KF models?

Thanks.

Markus

[FedeS]

Realtek RTL-81xx Drivers Version 10.048.0315.2021 WHQL
Date : 03/15/2021

https://station-drivers.com/index.ph...d=4874&lang=en

why are these drivers not present on the realtek site? are we sure the source is reliable?

[DataGhost]

F33i doesn't work on my Aorus Master rev 1.0.

Does not POST.

It does on mine, also a Master 1.0. Since it's the exact same board, I can only assume you also have the POST code LCD and 4 troubleshooting LEDs below it.

[the_real_skar]

hello guys and gals,

just wanted to report getting WHEA errors (event ID 19) on my x570 aorus pro using XMP @3600 as long as spread spectrum is on auto (=enabled). i noticed this with the bios version F33g and then tested with F32 which showed exactly the same behaviour.
with spread spectrum disabled, these errors don't occur anymore.
CPU is a 3600x - everything set to default.

[BagoBones]

hello guys and gals,

just wanted to report getting WHEA errors (event ID 19) on my x570 aorus pro using XMP @3600 as long as spread spectrum is on auto (=enabled). i noticed this with the bios version F33g and then tested with F32 which showed exactly the same behaviour.
with spread spectrum disabled, these errors don't occur anymore.
CPU is a 3600x - everything set to default.

It's a well known Old School fact that having Spread Spectrum enabled cripples performance. When enabling XMP or any kind of overclocking then disabling Spread Spectrum is pretty much mandatory. Some things never change......

[RitzyBusiness]

On the Aorus X570 Ultra board w/ F33h bios my USB issues are so far gone. I run a 1080ti in the PCI-E 16x slot so its not using any fancy gen 4 stuff the 3000 series might be using.

While my DAC would sometimes cut out, that was a rare issue. The most frequent and easiest issue to replicate was with my keyboard, when it would get stuck on an input and spam it about 10 times. Or it would just decide to not input and be weird. During normal typing it would happen at a maximum of every few minutes, but most of the time it they could be 30s apart. Affected me even in games, but to a lesser degree than typing. I loaded up monkey type zen mode and just typed words in for 10 minutes straight without any problems occurring. Add in the time required to type other things in between, and I can safely assume the problem is gone.

[Marucins]

News from 1.2.0.2 are fix issue in USB connections but 1.2.0.1 A too include this fix

In my case, the D5 pump from AquaComPuter is disconnected.
But AMD together with AGESA 1.2.0.1 deteriorated PBO ... What is very wrong:

https://www.tweaktownforum.com/forum/tech-support-from-vendors/gigabyte/28656-gigabyte-latest-beta-bios?p=978315#post978315

I prefer to go back to AGESA 1.2.0.0 and have one (running high PBO) and the second (USB disconnection)...
What version last of F33 had ASESA 1.2.0.0
F33C, F, G ?

[dxearner_2004]

It does on mine, also a Master 1.0. Since it's the exact same board, I can only assume you also have the POST code LCD and 4 troubleshooting LEDs below it.

F33i also running fine on my Master 1.0. Maybe try clearing CMOS.

[MrBeer]

I am on a master 33i no problems .

[cmoney619]

B550 Pro V2 F13g is missing FCLK Frequency option in BIOS do you have a beta for this?

[Nanochip]

Hi,

yesterday I installed my new Hardware:
Z590 Gaming X - Bios F2 out of the box
11700KF

MSI 3070 Gaming X Trio (rBar Bios installed)
64GB DDR4 3200/CL14
Creative X-FI

With BIOS F2 system boots, any newer BIOS result in a boot loop. Tried F3, F4b, F4c.
Post Code LED stuck at VGA und then shuts down.
Back to F2 I can boot again.

Are ther any known problems related to KF models?

Thanks.

Markus

Might it be your memory? Have you tried POSTING with just one memory stick? An earlier BIOS on the Z590 Vision D had problems with running all four of my memory modules, and failed to POST whenever I enabled XMP. That problem is fixed for me now.

[d00f]

Might it be your memory? Have you tried POSTING with just one memory stick? An earlier BIOS on the Z590 Vision D had problems with running all four of my memory modules, and failed to POST whenever I enabled XMP. That problem is fixed for me now.

Thanks!
I had that idea last evening too....and it worked.
After first boot I added the other 3 sticks with success.
Mem training even with cr1 works...easier than Z390.

That bootloop only occours after cmos reset with newer bios than f2.

[FedeS]

why are these drivers not present on the realtek site? are we sure the source is reliable?

UPDATE: these drivers appear to have been released for Fujitsu systems

[Cosimo Marilli]

hello guys and gals,

just wanted to report getting WHEA errors (event ID 19) on my x570 aorus pro using XMP @3600 as long as spread spectrum is on auto (=enabled). i noticed this with the bios version F33g and then tested with F32 which showed exactly the same behaviour.
with spread spectrum disabled, these errors don't occur anymore.
CPU is a 3600x - everything set to default.

you have to set the RAM voltage to 1.35V, and you won't have any problems