GIGABYTE Latest Beta BIOS

[squale323]

X570 AORUS Master - F33f don;t like ram on 1900 flk i had to go back to f33d

i've read somewhere there is a hole issue at 1900. did you tried directly 1933 or higher ?

[Kryptonic83]

X570 AORUS Master - F33
Found bugs:

- Tuning memory and setting manually CL13 does not work, memory ends up at CL14, while CL12 works

Do you have gear down enabled? Have to disable it to get odd timings

[D1g1talEntr0py]

Thank you stasio for all the updates. I really appreciate it.

Some things I have noticed with F33f on the X570 Xtreme. (v1.1)

While running single-threaded benchmarks, there is no more core bouncing. Or at least not nearly as much as before. Overall performance is down slightly on AVX workloads, but everything else seems to be the same as F33c. Stability is still good. IF 2000MHz is still giving tons of WHEA errors, but not that big of a deal as there is no way to tell if it is the memory controller on my chip, or the AGESA. 1900MHz has always worked for me without any issues whatsoever.

Still have a strange problem where changing values in the curve optimizer sometimes requires a full shutdown (or sometimes even a BIOS reset) or else performance is really bad. I will get bad single-threaded performance in CPU-Z benchmark and absolutely horrid multi-core performance in Geekbench 5. Not really that big of a deal since I have stabilized my curve now.

I've been really lucky as I have had no USB issues or audio cutouts and I can run my NVMe SSDs and RX 5600XT in Gen 4.

[dxearner_2004]

AMD Ryzen™ 5 5600X
GIGABYTE B550I AORUS PRO AX
G.SKILL Flare X F4-3200C14D-32GFX

L3 Cache speed is back.
I don't know the difference between the other parts.
My system has secured stability.

L3 cache is the same, they just fixed an AIDA benchmark specific issue.

[Gordon1979]

Cinebench R23 (Multi) F13a - 11232
Cinebench R23 (Multi) F13c - 11147
Cinebench R23 (Multi) F13e - 11200

Cinebench R23 (Single) F13a - 1538
Cinebench R23 (Single) F13c - 1535
Cinebench R23 (Single) F13e - 1532

3DMark Timespy F13c - 9957 (CPU Score 8310)
3DMark Timespy F13e - 9967 (CPU Score 8248)

Hi these values say nothing.
These can be classified as measurement tolerance.

stasio; I have to wait for my board, these I had to send to the dealer. Defect.

[boXerrumble]

Hi these values say nothing.
These can be classified as measurement tolerance.

stasio; I have to wait for my board, these I had to send to the dealer. Defect.

Which is exactly what I said in my post... The values were all consistent - which is a good thing.

[baldersz]

Is there any update on the consistent Bluetooth dropout on the b550i auros pro ax? Running the latest Bluetooth driver from Intel (22.30) and Windows 10 is up to date / latest patches. Has Gigabyte even acknowledged this issue? So frustrating that I have to power down, remove power cable for 30 seconds to resolve it.

[skynetDE]

Is there any update on the consistent Bluetooth dropout on the b550i auros pro ax? Running the latest Bluetooth driver from Intel (22.30) and Windows 10 is up to date / latest patches. Has Gigabyte even acknowledged this issue? So frustrating that I have to power down, remove power cable for 30 seconds to resolve it.

Although it's also just a workaround, enable ErP, which turns off power on all devices after shutdown.
This mimics the same as removing the power cord.

This way it worked for me for a whole week now.

[Endurance99]

I just ran shadow of the tomb raider benchmark and with agesa 1.2.0.0 and 1.2.0.1 bios performance in this game decreased. My old screenshots were made with some f11 bios.
Memory had slightly different timings, but i doubt such change can cut minimum FPS this much.
https://i.imgur.com/1GmV0c6.jpg - before
https://i.imgur.com/BXS3acf.jpg - after
Yes there is also different GPU driver, but i am 0% gpu bound in this test. Can anyone confirm this?
Motherboard is b550 aorus pro.

Was able to do some testing on my B550 Aorus Master during weekend. CPU-Scores in various benchmarks seem about 1% lower with F13e than on F10, but same as with final F11. In any games tested it's about 1-2% performance drop or increase (depends on game). I'd say it's the same concerning speeds. I'm still having lag with CSM disabled (please Gigabyte do something!) but USB disconnects seem to be gone. At least I didn't recognize any until now, Yesterday I made my monthly backup from SSD to USB3.0 SSD and no disconnects. Didn't have that since I have the board. Sound stuttering an crackling on Logitech G432 headset has gone as well. Seemingly they already did something in 1.2.0.1 that is perhaps solving problem for me (or at least minimizing, we'll se that in the future). Can' wait to get my hands on bios with 1.2.0.2.

Conclusion:
A long awaited step in the right direction.

[DawieZA]

Thanks for all the time you spend to keep this thread updated with the latest bios files stasio. I now visit this thread daily. Any chance you can start sharing the bios files for the B550 GAMING X V2?

[Kirill_24_02_1988]

Hi guys! will there be resizable bar support on the ryzen 3000 for the RTX 3080 and when will the GPU firmware be released?

[Amioran]

Let's hope AGESA 1.2.0.2 will resolve USB issues so I can finally use my Reverb G2 properly without having to connect it to an external powered USB HUB and the latter stopping to work at every reboot without Erp enabled in the bios.

[stasio]

Thanks for all the time you spend to keep this thread updated with the latest bios files stasio. I now visit this thread daily. Any chance you can start sharing the bios files for the B550 GAMING X V2?

F13e...
https://www.mediafire.com/file/nexp4...2.F13e.7z/file

[SesioNLive]

Do you have gear down enabled? Have to disable it to get odd timings

Thanks, that was indeed why CL13 didn't work.

Nonetheless, it seems that I've got a bad infinity fabric CPU sample.

Anything above 1600 Mhz on the infinity fabric (no matter how much voltage) leads to instant memory errors in MemTest5 :(

[DawieZA]

Thanks stasio