GIGABYTE Latest Beta BIOS

[karlos007]

i installed f33a on my x570 and i have inestable ram, i have crashes on warzone sometimes, even i've put the ram at 3200 instead 3600.

what could i do?

[Jamin280672]

i installed f33a on my x570 and i have inestable ram, i have crashes on warzone sometimes, even i've put the ram at 3200 instead 3600.

what could i do?

Flash back to an older bios, or use the backup bios, im not having any issues with F33a at all

[marstein]

On an Aorus Elite Wifi x570 with 64GB 3600C18 memory and a 5700X F33a seems to work fine. Rock-solid in fact. CSM disabled, SVM enabled.

[g111]

I'm interested in trying to change VCCIO voltage but I can't seem to find this option on my B550i Aorus Pro AX. Anyone know if their motherboard has it? Or maybe it's under a deep menu or GB calls it something else?

[TrebleTA]

Under a different name,VCCSA is system agent volt. VCCIO was there on my z390 master

[riot]

stasio Hi bro, anything new about trx40 aorus xtreme :( ?

[Supernaut]

Is anything going to be done about sleep states?
This was amended I believe in 1.1.1.9 and 1.2.0.0 to allow for S1 , S2 and S0?

If you run a powercfg /a in cmd the following still shows for me in regards to sleep states

--------------------------------------------------------------------------------
The following sleep states are available on this system:
Standby (S3)
Hibernate
Hybrid Sleep
Fast Startup

The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.

Standby (S2)
The system firmware does not support this standby state.

Standby (S0 Low Power Idle)
The system firmware does not support this standby state.
--------------------------------------------------------------------------------

Looking at an article provided by Microsoft (https://docs.microsoft.com/en-us/win...n-standby-faqs), one of the Q&As states:

Q: Can I switch between S3 and Modern Standby by changing a setting in the BIOS?

A: No, switching the power model is not supported in Windows without a complete OS re-install.


================

This basically means that every single person needs to do a full Windows reinstall to take advantage of low power / standy sleep states.

Astounding.

[Jason_Cruze]

Using the latest F13a BIOS, USB devices does not work when re connected to the system after removing it, system hangs during stress test and stays like that until reboot.
Has anyone else been facing these issues in the latest B550 BIOS.

I have thought it was due to the high FCLK i have set but it looks like even at 1900 FCLK which works perfectly in F12 BIOS shows the above mentioned behavior under 13a BIOS.
Can anyone else confirm.

Hi stasio When can we expect the next beta to drop out. Thanks

[mgfirewater]

Jason_Cruze i have exactly report the same bug

https://www.tweaktownforum.com/forum/tech-support-from-vendors/gigabyte/28656-gigabyte-latest-beta-bios?p=977337#post977337

[Jaybird2203]

Maybe I'm missing something but on my B550i I've only ever encountered the Bluetooth that dropped offline after a BIOS upgrade (which removing power cable, press/hold power button then reattach power addressed) but also only using the built in wifi... I'd also upload screenshots of zen timings and HW info but appears my account can't do it currently.

Otherwise.....4Ghz mem running 19-19-19-39 as per XMP profile by default, MCLK/FCLK/UCLK all 2000 (as per Zen timings 1.2.2) via manual set of inf clock to 2000 in BIOS....no WHEA errors after ~35 mins of run time including gaming, ~10Gb of file decompression and idle (never had them on any of the BIOS that were ran (F11i/n/F12))....GDM is disabled, enabled rebar most everything else is set to auto. Per HWinfo 6.40-4330 cores are max out at 4649.9MHz.

Specs of HW: B550I running F13a, 5600X, dual F4-4000C19-16GTZR, Windows 10 20H2, Gigabyte NVMe 1TB drive (GP-ASM2NE6100TTTD), Corsair RM850, Gigabyte RTX3070 Aorus Master

[avikef]

USB stuttering on B550 Aorus Pro v2. latest bios. Running 5600x.

[rehsd]

X570 Aorus Ultra rev 1.0 with F33a -- I'm getting an alarm sound from the internal speaker (F_PANEL) periodically. It acts as though a temp or fan failure alarm has gone off, but all temps and fans look good. All voltages also seem fine. All alarms are turned off in BIOS. Sometimes a restart will shut the alarm off. I just had the issue again and had to turn off the computer to get rid of the alarm. I've never had this issue prior to F33a. Does this sound like a bug in F33a? Other things I should look at? If it happens again, I will probably roll back to F32 and see if I run into it again.

[Kirill_24_02_1988]

X570 Aorus elite F33a I confirm that there is a bug with the speaker when you turn on protection against high CPU temperatures
I also watch friezes on a USB laser mouse and it stutters
Also, the computer sometimes turns off with a delay. The monitor goes out coolers are on and then only turns off

[mgfirewater]

avikef with which flck ram frequence?

[FedeS]

Drivers 10.46 have also appeared on the realtek site (after a month.....)
I haven't tried yet but i don't know if they are the same as the Gigabyte website
Those issued by gigabyte website i confirm that they do not solve the problems related to UDP

EDIT: same driver