GIGABYTE Latest Beta BIOS

[Reo]

Re: Gigabyte Latest BIOS

no problem with HT on or off @ anny bclk. ud5@f7c extreme

[hyakki]

[bluehaze013]

Re: Gigabyte Latest BIOS

no problem with HT on or off @ anny bclk. ud5@f7c extreme

Try with normal UD5 F7 bios LOL Even load defaults then turn off HT does not work!

[Reo]

Re: Gigabyte Latest BIOS

well, happy with my crossflash then!

[Tyreman]

Re: Gigabyte Latest BIOS

Bios F-9 going fine here now(finally) on UD3P

[tlac]

Re: Gigabyte Latest BIOS

f9 has the old version of ahci

[Tyreman]

Re: Gigabyte Latest BIOS

Thats a a good question
I am not running ahci so am not sure if it has changed.
It of course is still there in its old(previous) place.

[tijgert]

Re: Gigabyte Latest BIOS

I noticed on EX58 Extreme with the F6f bios that in Windows Turbo doesn't work.
Also the whole system was really slugish...

[Lsdmeasap]

Re: Gigabyte Latest BIOS

Beta BIOS GA-X38-DQ6 F9h >>
x38dq6.f9h

Update: Intel AHCI 1.20E

[davidh44]

Re: Gigabyte Latest BIOS

Does the final F9 bios on the GA-EP45-UD3P fix S3 resume problems? (for those who had S3 resume problems with F9b and earlier).

[rbarbier]

Re: Gigabyte Latest BIOS

Looking for a newer Bios (newer then F3) for GA-MA790XT-UD4P. I have the AMD AM3 955 CPU. When I turn the PC on, it does show the correct CPU name. I have to go into the Bios to set everything (which isn't a problem). I set the voltage to 1.25 and the multiplier to 16x. I turned off Cool n Quiet also. The problem I am having is that the CPU is running at 4x multiplier no matter what I set it to in the Bios. The only way to fix this is to run AMD overdrive everytime and to set the multiplier to the correct 16x. Then, I am running at the correct speed. I can change the bus speed from 200mhz in the bios and that change stays according to CPUz but the multiplier is always 4x unless I use AMD overdrive. I know it is running slow at 4x 200 (800mhz).

[Rolfi]

Re: Gigabyte Latest BIOS

I noticed on EX58 Extreme with the F6f bios that in Windows Turbo doesn't work.
Also the whole system was really slugish...

What are your settings? I realy proved als bios up to 7c now... under 7c my pc even booted with oc settings like in 6f.

[reason]

Re: Gigabyte Latest BIOS

I just flashed to the new bios and noticed an improvement over disk access. Before, the drive was constantly going into some sleep mode like every few minutes. It was *annoying* as hell. I was beginning to think the drive was bad. But I have had no issues since.

[mudkip]

Re: Gigabyte Latest BIOS

I also noticed that using the turbo modus under high frequency doesn't work. With older BIOS I could boot at 21 x 215 , now i can't get the 21 multiplier anymore with the same bClk and voltage.

[reason]

Re: Gigabyte Latest BIOS

well I just noticed that the pc won't come out of sleep mode now. I left it on lastnight, and this morning nothing would wake it up. I had to soft reboot. I am wondering if this had anything to do with me updating bios, not clearing the default cmos values. I didnt want to have to re-enter all of my OC settings.