GIGABYTE Latest Beta BIOS

[stasio]

Re: GIGABYTE Latest Beta BIOS

^Try this F3a.
Edit:
your mobo don't have hardware (Digital Power) for Vcore option.
For overclock you can use ET6.

[shiecldk]

Re: GIGABYTE Latest Beta BIOS

^This is what you ask,right?

Since the firmware works OK, why Gigabyte don't release an official UEFI firmware?
CPU turbo actually works OK now, but fan speed detecting has some problem.
Only 2nd System Fan can show the speed, others such as CPU fan and Power Fan show 0 RPM.

PS. I'm a hackintosh user. Win8 and OS X works great after flashing the firmware.

[Taras F]

Re: GIGABYTE Latest Beta BIOS

Hi Stasio!

Any planned releases for other P67? Is it possible to make something similar for p67a-ud4-b3?
I'm not familiar with the real hardware differences of the boards ... UD3-B3 and UD4-B3 ... there is at least some in the option devices. Though, i could mod UD3-B3 UEFI bios with the roms that UD4-B3 have so that finally UEFI will be available for my board. Subject to the rest things are compatible on these boards.

^
So, I modded P67A-UD3-B3 BIOS U1a to be flashed on your P67A-UD3R-B3 with FLASHEFI.
Link:
p67a-ud3(R)-b3_u1a.zip

Flash on your your own risk.!

[Amurtigress]

Re: GIGABYTE Latest Beta BIOS

@Stasio:

X79-UD5 F13i: BIOS reduces the needed stable VCore at 4375 MHz from 1.375V to 1.34 for my i7-3820, and the vcore loadline calibration can be reduced to turbo from extreme. ^.^ Very good.

Going to try F13k tonight

[ericgl]

GIGABYTE GA-Z77X-UD5H with F15t modded BIOS

Here's the result on non-compressible/random data on Crystal Disk Mark (Windows 7 SP1 x64):



It's actually worse than from the previous 11.5.x OROM & driver combination. Too bad!!

[stasio]

Re: GIGABYTE Latest Beta BIOS

^There is actually nothing with this thread.

[Boomstick777]

Re: GIGABYTE Latest Beta BIOS

Hey guys, running a set of F3-2400C10D-16GTX on GA-X79-UD5 - F13k latest beta bios. I can't get past 1866mhz without system not posting / booting. I get never ending boot cycle or black screen. Once I drop down to 1866mhz it's fine again. I have tried XMP 1.0 and 2.0 and also manually setting the ram, no joy either way.

Any suggestions on how to reach it's 2400mhz speed, could a future bios unlock the full ram speed?

Thans for any help / advice, thankyou.

[Acebmxer]

Re: GIGABYTE Latest Beta BIOS

@boomstick777 If your having trouble overclocking it is suggested that you start your Owen post about your problems so others can help you work them out. Posting in the bios thread it is likely to get lost or ignored.

[Boomstick777]

Re: GIGABYTE Latest Beta BIOS

@boomstick777 If your having trouble overclocking it is suggested that you start your Owen post about your problems so others can help you work them out. Posting in the bios thread it is likely to get lost or ignored.

Ok no worries.

[xomoxo]

Re: GIGABYTE Latest Beta BIOS

On X79-UD7, with F11q I could obtain 4.5GHz with lower dvid, I pass from +0.045v to +0.010v (very good work with the improved VDROP).

The only issue is that with F11o my RAM was stable with 2290Mhz and now I had to lower it to 1956 (aprox).

[hazeisgud]

Re: GIGABYTE Latest Beta BIOS

Tested bios f13k, it works great!
No more vdrop thank you so much stasio you saved me 340 euro's!
Stasio where can we donate you some money?


1.476 to 1.488 where i used to have -0.04 now i have +0.010

x79-ud5

[stasio]

Re: GIGABYTE Latest Beta BIOS

New BIOS:

GA-Z77M-D3H - F14a
GA-Z77-DS3H - F10b

- Update CPU microcode
- 16/17.Oct 12

GA-X79-UP4 - F3k

- 19.Oct 12

[psyclist]

Re: GIGABYTE Latest Beta BIOS

Ive got a Z68X-UD4-B3, with a 2600k running bios F8 right now. Clocked to 4.7 at 1.39v LLC=6

From what im reading the new U1c bios lacks Load Line Calibration for sandybridge, but has it for Ivy? seeing as how this isnt on the Gigabyte website yet, will there be an official UFEI bios, or is this as good as we are going to get sort of thing? Because as of right now my "enthusiast" motherboard is lacking a fairly crucial feature, correct?

Anybody have an idea?

[stasio]

Re: GIGABYTE Latest Beta BIOS

New BIOS:

GA-Z68X-UD3H-B3 - U1j

- 23.Oct 12

[Ingram]

Re: GIGABYTE Latest Beta BIOS

New BIOS:

GA-Z68X-UD3H-B3 - U1j

- 23.Oct 12

At last! Going to try it right now.

Update: One problem still exists - When marvell controller is disabled in bios and then computer is put to sleep, the controller gets enabled again after waking up (visible under device manager)

Also status leds still don't behave as they did in the regular bios, however this is not a high priority issue.