If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Be also sure you load optimized defaults, save and apply/reboot and go back to the BIOS to check your disk settings and load windows (AT Defaults)
This way the DMI pool is allowed to recreate with the new BIOS and the backup BIOS will then be flashed at the IRQ Screen as windows begins to load. Then reboot as normal and do your overclock settings, Needed BIOS changed, ect.
Be also sure you load optimized defaults, save and apply/reboot and go back to the BIOS to check your disk settings and load windows (AT Defaults)
This way the DMI pool is allowed to recreate with the new BIOS and the backup BIOS will then be flashed at the IRQ Screen as windows begins to load. Then reboot as normal and do your overclock settings, Needed BIOS changed, ect.
I'be no idea what you're talking about :P
I just flashed the bios and the first time I POST after the flash there was an auto recovery, then the motherboard did a reboot and after that I checked the Motherboard in CPU-z which shows me that my motherboard is recognized as ''Extreme''
He said he had the F9A bios working on a UD5 , and that's not possible without modding the bios checksum
I see. Thanks for clarifying.
Edit. Congrats on the successful cross flash. It's always nice to get a little bit extra for free. Basically doing that, you've as good as "earned" yourself some money.
Comment