GIGABYTE Latest Beta BIOS

[Eldad]

the fullsized pic

[xlollomanx]

Shonk, thanks for the info, do you have a recommendation for 12700K ?

intel 12th gen doesn't suffer the problems of 13th and 14th gen. U don't need to do anything special

[Eldad]

intel 12th gen doesn't suffer the problems of 13th and 14th gen. U don't need to do anything special

Thanks, I've stopped trying to make my DDR5 work at his max speed, I have F5-6000U3636E16G by G.Skill, XMP isn't stable, even if I lower to 5.6K it's not as stable as leaving it at his base 4.8K.
I always hopped a new bios will support this module

[barrywhite123]

Has anybody tested the new F30 Firmware ? Is it save to update form F29 ? @Shonk any recommendateions for the I5 13600kf ?

[Shonk]

the fullsized pic

This is what i use on my 12900K and what i would use on a 12700K

your at 0.5/0.9 which will most prob cause stability issues as its far too low

[Shonk]

Has anybody tested the new F30 Firmware ? Is it save to update form F29 ? @Shonk any recommendateions for the I5 13600kf ?

Same as 12900/K12700K

[grzegorz]

Why is my post still not approved?

[aourus b 450]

hi everyone, I upgraded to latest bios on aourus b450 elite.. recently I upgraded to AMD Ryzen 9 5950X , it worked ok for two weeks, bios logo was on monitor resolution, then afterwards I left pc on and went to job, after return my pc started acting weirdly bios logo was set on low res and I couldn't enable anymore any bios settings, its doing automatic reset and couldn't enable numa nodes on it. Also half of appcenter apps aren't working properly on windows 11.I am kinda pulling my head here,tried to change mbo battery and tried changing my isp to tcom. Nothing helps...
If anyone could be helpful and try to tell me is it automatically activated encapsulated bios somehow? Or is it somehow some kind of virus infesting amd cpus with sinkclose.
Weird thing it took them 2 weeks to broke it.. maybe mbo change is an option but which mbo to pick then, unsure which vulnerabilities intel has...

[maruusa]

good

[lowmotion]

stasio

Gigabyte support told me to visit standard bios page. No beta bios for my new z890i?

[Bcknee]

New update coming F40d is available for my X570 Aorus Elite: https://download.gigabyte.com/FileLi...ts005_f40d.zip They always seem to drop the newest one right before they update it as the update file is in the servers and dated to a few days ago. Likely others available as well just change URL to whatever the next release would be for your board. I haven't noticed any loss in performance maybe less frequent boosting on my X3D chip but not tested just my feeling that I notice it boosting less often. Secure boot has been fine for me updating on all the new versions still active and enabled with no intervention and I always flash the latest BIOS ASAP. I have probably flashed my BIOS chip like over 100 times since 2019 with all the beta releases that they have put out we almost used up the whole alphabet a few years ago. I still can't control the LEDs on my G.Skill RAM on this version might try flashing an older version just for a sanity check but don't really care, just prefer static red to rainbow.

The LED control issue was something on the software side as the latest update to GCC fixed it although I think technically GCC (Gigabyte Control Center) is for newer boards it works with my X570 Aorus Elite just wanted to post that the issue was resolved in case anyone else has the same problem and comes across this post.