Originally posted by stasio
View Post
Announcement
Collapse
No announcement yet.
GIGABYTE Latest Beta BIOS
Collapse
This is a sticky topic.
X
X
-
-
As mentioned there is a new version of App Center B21.09.08 - the default is for the update to be detected on next reboot
After installing this if you open the Liveupdate page you will then see updates for SIV and EasyTuneEngineService
[TIP]Before updating anything here always remember to go to the Not Installed page and untick anything not wanted - like Norton
There is also an update to the Realtek Audio driver to 6.0.9225
[TIP]Before updating - to avoid a Install/Reboot loop
- Uninstall previous driver version from Programs and Features
- Reboot
- Then just before updating from AppCenter - Uninstall the Realtek device found under Sound/video/game in Device Manager
Comment
-
Now way, these is out there now: F35b To Improve Memory Comparability. Thank you Gigbatye!! (Under )X570 AORUS PRO WIFI (rev. 1.0)
Hmm the F35b BIOS update did not fix my memory problem as described above, in other words still only 1 of 2 2x16 ripjaws V 3200 CL14 strips are being recognized, so running at half memory, half speed, on 5700g till I get this resolved.Last edited by stasio; 09-10-2021, 01:54 PM.
Comment
-
Famous B550I AORUS PRO AX
F14c
- Likes 4
Comment
-
-
Originally posted by SkySong View PostNow way, these is out there now: F35b To Improve Memory Comparability. Thank you Gigbatye!! (Under )X570 AORUS PRO WIFI (rev. 1.0)
Hmm the F35b BIOS update did not fix my memory problem as described above, in other words still only 1 of 2 2x16 ripjaws V 3200 CL14 strips are being recognized, so running at half memory, half speed, on 5700g till I get this resolved.
- Likes 1
Comment
-
-
-
B550 DS3H -> F14c -> https://www.gigabyte.com/Motherboard...upport-dl-bios
Improve Memory Compatibility.
Comment
-
I test 14c. I could load my complete setting from f13 without any information "setting incompatible". but all ram values wouldn't be accept! Only the flck value where take. The ram runs with 26667mhz and bad timings after first boot.
But I could set my old setting manual without any problems.
I believe f14 is the first UEFI where you can change the flck direct in the settings page. It's outsource from the oc submenu.
Comment
-
Originally posted by mgfirewater View PostI test 14c. I could load my complete setting from f13 without any information "setting incompatible". but all ram values wouldn't be accept! Only the flck value where take. The ram runs with 26667mhz and bad timings after first boot.
But I could set my old setting manual without any problems.
I believe f14 is the first UEFI where you can change the flck direct in the settings page. It's outsource from the oc submenu.Last edited by stasio; 09-11-2021, 11:16 AM.
Comment
Comment