Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

[ADDIER]

[Lsdmeasap]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Well it could be the FSB, or just the ram runs better at slower speed with tighter timings

[ADDIER]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Yesterday I have a problem with my board... i playing and see the voltage ''no move'' 1.3600 idel 1.3600 full :S.. Then off the computer and run again, when acces in the bios see cores speed 3080 (385*8) when me continue, but the ''TAB'' screen(black screen whith white letters) ''core speed 2.136 (267*8) showme the speed.. and reset a verify the speed.. and showme again in bios.. 385*8... Then on normally thought that it was a simple problem... when enter windows showme a ''errors'' (In hour,Nod32,hardware of audio'' and reset-->> Show blue screen :-( :-(.

Off the PC and enter in bios again.. when try ''move o reset a any value'' BIOS freezes
ClearCmos and set a ''normal values'' and RUN ok.......

Because this ???? what is a problem???

Try again the OC :( Or I forget forever

[Lsdmeasap]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Not sure, glad you got it cleared. You should be fine trying the overclock again.

Do you defrag your disk often? If not that could be the issue, changing settings and rebooting failures during overclock attempts often mess up the disk so best to defrag your disk often

[ADDIER]

[Lsdmeasap]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

So you get it working then after your HD?

[ADDIER]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

No... FAIl again and again... today flash my bios..... and NOT try up more the core... fail fail fail fail :-( :-(

[Lsdmeasap]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Post me your full settings that are failing and I will see if I can help. And please add your spec's into your signature so I dont have to hunt them down.

[ADDIER]

Yesterday I have a problem with my board... i playing and see the voltage ''no move'' 1.3600 idel 1.3600 full :S.. Then off the computer and run again, when acces in the bios see cores speed 3080 (385*8) when me continue, but the ''TAB'' screen(black screen whith white letters) ''core speed 2.136 (267*8) showme the speed.. and reset a verify the speed.. and showme again in bios.. 385*8... Then on normally thought that it was a simple problem... when enter windows showme a ''errors'' (In hour,Nod32,hardware of audio'' and reset-->> Show blue screen :-( :-(.

Now today try set this settings and system NOT ON...

Sames settings.. only fail.. show me black screen....

[Lsdmeasap]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Maybe add a bit more MCH Voltage see if that helps. To maybe .25 MCH

And this manaually set >>
Refresh to ACT Delay______________ 52-65--->> 54

Static tRead Value_______________8-12--->>8-9

Can you post me a image of what Auto gives you for all the settings above in Auto with Memset? Thanks >>>
Tweakers.fr

[ADDIER]

[ADDIER]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

In auto --->>>>



Bios un auto

[ADDIER]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Times and latency auto



Edited--->>>




SORRY por continuos POTS... system no letme add 8 images in same time..

[ADDIER]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

BIOS edited

[Lsdmeasap]

Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide

Try static Tread 9 or 10