Announcement
Collapse
No announcement yet.
Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide
Collapse
This is a sticky topic.
X
X
-
Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide
Yesterday I have a problem with my board... i playing and see the voltage ''no move'' 1.3600 idel 1.3600 full :S.. Then off the computer and run again, when acces in the bios see cores speed 3080 (385*8) when me continue, but the ''TAB'' screen(black screen whith white letters) ''core speed 2.136 (267*8) showme the speed.. and reset a verify the speed.. and showme again in bios.. 385*8... Then on normally thought that it was a simple problem... when enter windows showme a ''errors'' (In hour,Nod32,hardware of audio'' and reset-->> Show blue screen :-( :-(.
Off the PC and enter in bios again.. when try ''move o reset a any value'' BIOS freezes
ClearCmos and set a ''normal values'' and RUN ok.......
Because this ???? what is a problem???
Try again the OC :( Or I forget forever
Comment
-
Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide
Not sure, glad you got it cleared. You should be fine trying the overclock again.
Do you defrag your disk often? If not that could be the issue, changing settings and rebooting failures during overclock attempts often mess up the disk so best to defrag your disk often
Comment
-
Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide
Post me your full settings that are failing and I will see if I can help. And please add your spec's into your signature so I dont have to hunt them down.
Comment
-
Yesterday I have a problem with my board... i playing and see the voltage ''no move'' 1.3600 idel 1.3600 full :S.. Then off the computer and run again, when acces in the bios see cores speed 3080 (385*8) when me continue, but the ''TAB'' screen(black screen whith white letters) ''core speed 2.136 (267*8) showme the speed.. and reset a verify the speed.. and showme again in bios.. 385*8... Then on normally thought that it was a simple problem... when enter windows showme a ''errors'' (In hour,Nod32,hardware of audio'' and reset-->> Show blue screen :-( :-(.
Now today try set this settings and system NOT ON...
Sames settings.. only fail.. show me black screen....Last edited by ADDIER; 11-05-2008, 02:11 PM.
Comment
-
Re: Gigabyte X38/P35/P965 (DS* DQ* S3) Overclocking and General BIOS tweaking Guide
Maybe add a bit more MCH Voltage see if that helps. To maybe .25 MCH
And this manaually set >>
Refresh to ACT Delay______________ 52-65--->> 54
Static tRead Value_______________8-12--->>8-9
Can you post me a image of what Auto gives you for all the settings above in Auto with Memset? Thanks >>>
Tweakers.fr
Comment
Comment