Announcement

Collapse
No announcement yet.

P35-DS4 bios F10 still bugged

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P35-DS4 bios F10 still bugged

    I am still getting the dfeed0f18 error in memtest reguardless of overclocked, stock or underclocked. F9 does this as well, and I go back to F8 and the problem is gone and will only error when my RAM is the cause. Although I boot faster with F10 bios...

    Please fix?
    Last edited by GiggaByte; 01-05-2008, 07:37 AM.

  • #2
    Re: P35-DS4 bios F10 still bugged

    Bummer, I was hoping they could do it right this time! Thanks for checking it out GiggaByte

    Comment


    • #3
      Re: P35-DS4 bios F10 still bugged

      Same here, I just did a test. Now I have to download f8 again

      Comment


      • #4
        Re: P35-DS4 bios F10 still bugged

        Same here......... OCZ ram or Corsair ram same thing.

        Comment


        • #5
          Re: P35-DS4 bios F10 still bugged

          also was waiting for F10!!
          Has anybody notice that F10 bios will not let you overclock???
          Bios stays with overclock settings
          BUT Post screen and desktop (cpuz) says your still @ stock ???
          I have tried going back to F8 but it still happens
          can not overclock anymore!
          Last edited by cameltoetongue; 01-05-2008, 11:52 AM. Reason: format

          Comment


          • #6
            Re: P35-DS4 bios F10 still bugged

            CPU-z will not show true speed if cpu is not working hard.

            Try this http://www.wizard-soft.com/
            Go there and at the bottom is a free program called "cpu speed"

            Comment


            • #7
              Re: P35-DS4 bios F10 still bugged

              [quote=Robertwm;246657]CPU-z will not show true speed if cpu is not working hard.

              thanks bud but im overclocking
              turned off C1E / speedstep and every other bit of crap that controls cpu
              also i said post screen aswell
              lol if you cant trust cpuz then im packing up and moving out ;)

              Comment


              • #8
                Re: P35-DS4 bios F10 still bugged

                Originally posted by cameltoetongue View Post
                Has anybody notice that F10 bios will not let you overclock???
                can not overclock anymore!
                FIXED pulled bios battery for a while and everything okay

                still have that annoying memtest fault

                Comment


                • #9
                  Re: P35-DS4 bios F10 still bugged

                  Originally posted by cameltoetongue View Post
                  FIXED pulled bios battery for a while and everything okay
                  Damm its not fixed
                  any chance of answering that email i sent you GIGABYTE - Janus Yeh??

                  Comment


                  • #10
                    Re: P35-DS4 bios F10 still bugged

                    Originally posted by cameltoetongue View Post
                    Damm its not fixed
                    any chance of answering that email i sent you GIGABYTE - Janus Yeh??

                    YouŽll probably get the same answer as i did when i was asking about F10 for my rev.2.0 board: it is NOT for this board. (?????????)
                    Last edited by dosign; 01-07-2008, 07:40 PM.

                    Comment


                    • #11
                      Re: P35-DS4 bios F10 still bugged

                      [quote=cameltoetongue;246658]
                      Originally posted by Robertwm View Post
                      CPU-z will not show true speed if cpu is not working hard.

                      thanks bud but im overclocking
                      turned off C1E / speedstep and every other bit of crap that controls cpu
                      also i said post screen aswell
                      lol if you cant trust cpuz then im packing up and moving out ;)

                      Mabye I'm not understanding you right but my 1.8 e2160 is running at 3.0Mhz
                      However, in CPU-z it only shows core speed at 1.9. If I run the "wizard soft" cpu speed test right next to cpu-z, cpu-z will then shoot up to 3.0Mhz for a sec then go back down to 1.9 after the test is done.
                      Last edited by Robertwm; 01-08-2008, 03:29 AM.

                      Comment


                      • #12
                        Re: P35-DS4 bios F10 still bugged

                        Originally posted by Robertwm View Post
                        If I run the "wizard soft" cpu speed test right next to cpu-z, cpu-z will then shoot up to 3.0Mhz for a sec then go back down to 1.9 after the test is done.
                        try turning off "cpu enhanced halt (C1E)" and "cpu EIST function" in bios (advanced bios features)
                        your pc should run at 3ghz all the time??
                        and also in (pc health) change smart fan control method/mode to disabled and voltage
                        it will make your cpu fan run at 100%

                        Comment


                        • #13
                          Re: P35-DS4 bios F10 still bugged

                          f11 bos?

                          Comment


                          • #14
                            Re: P35-DS4 bios F10 still bugged

                            i don't see a F11 released anywhere

                            as for the comment the F10 was for rev 2.1 only, i doubt that since the Bios version were always the same for all board revisions

                            Comment


                            • #15
                              Re: P35-DS4 bios F10 still bugged

                              if you can use F10, you can also use F11
                              MAIL ME I WILL SEND YOU

                              janus.yeh@gigabyte.com.tw

                              Comment

                              Working...
                              X