Announcement

Collapse
No announcement yet.

P35C-DS3R CPU Fan issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P35C-DS3R CPU Fan issue

    EP45-UD3P @ F7 // Q9650 // 2x2GB OCZ2P10664GK
    XFX 260 Black Edition // Corsair HX620W // Antec P182
    Thermalright Ultra 120 Xtreme // Scythe S-FLEX

  • #2
    Re: P35C-DS3R CPU Fan issue

    It's kind of stupid to reply to my own post but has someone else observed the same on a P35C-DS3R ?

    txs
    M
    Last edited by Early Bird; 11-07-2007, 02:31 AM.
    EP45-UD3P @ F7 // Q9650 // 2x2GB OCZ2P10664GK
    XFX 260 Black Edition // Corsair HX620W // Antec P182
    Thermalright Ultra 120 Xtreme // Scythe S-FLEX

    Comment


    • #3
      Re: P35C-DS3R CPU Fan issue

      My fan on my Sythe Ninja cooler doesnt run until the CPU reaches around 30C. The temps only go above 30C when under heavy load. During normal tasks the temp doesn go above 27C.

      So yes, this is the norm.

      My specs:
      Antec P180 (Black)
      Aerocool Turbine 550w PSU
      Core2 E6320 (4Mb cache)
      Scythe Ninja cooler
      Gigabyte GA-P35-DS3R
      2Gb Kingston valuRAM DDR2-667
      Asus Nvidia 7300GS 256Mb Graphics
      Samsung 250gb Sata-300
      Maxtor 300gb Sata-300


      Now overclocking at 2.3Ghz (27C idle - 47C load) - CPU undervolted to 1.3v

      Comment


      • #4
        Re: P35C-DS3R CPU Fan issue

        Originally posted by HarryHedgehog View Post
        My fan on my Sythe Ninja cooler doesnt run until the CPU reaches around 30C. The temps only go above 30C when under heavy load. During normal tasks the temp doesn go above 27C.

        So yes, this is the norm.

        My specs:
        Antec P180 (Black)
        Aerocool Turbine 550w PSU
        Core2 E6320 (4Mb cache)
        Scythe Ninja cooler
        Gigabyte GA-P35-DS3R
        2Gb Kingston valuRAM DDR2-667
        Asus Nvidia 7300GS 256Mb Graphics
        Samsung 250gb Sata-300
        Maxtor 300gb Sata-300


        Now overclocking at 2.3Ghz (27C idle - 47C load) - CPU undervolted to 1.3v
        @ HarryHedgehog what bios version do you have please, I run F5.

        txs
        M
        EP45-UD3P @ F7 // Q9650 // 2x2GB OCZ2P10664GK
        XFX 260 Black Edition // Corsair HX620W // Antec P182
        Thermalright Ultra 120 Xtreme // Scythe S-FLEX

        Comment


        • #5
          Re: P35C-DS3R CPU Fan issue

          Originally posted by Early Bird View Post
          @ HarryHedgehog what bios version do you have please, I run F5.

          txs
          M

          Yes, I run F5 too.

          To be honest I have always updated to the latest BIOS (I started with F1) and the fan not turning until 30C has always been there.

          Comment


          • #6
            Re: P35C-DS3R CPU Fan issue

            Originally posted by HarryHedgehog View Post
            Yes, I run F5 too.

            To be honest I have always updated to the latest BIOS (I started with F1) and the fan not turning until 30C has always been there.
            cheers mate, so the likelyhood to toast the processor is nil.

            txs,
            M
            EP45-UD3P @ F7 // Q9650 // 2x2GB OCZ2P10664GK
            XFX 260 Black Edition // Corsair HX620W // Antec P182
            Thermalright Ultra 120 Xtreme // Scythe S-FLEX

            Comment


            • #7
              Re: P35C-DS3R CPU Fan issue

              Originally posted by Early Bird View Post
              cheers mate, so the likelyhood to toast the processor is nil.

              txs,
              M

              I was a little concerned with the fan issue at first. But having monitored the CPU core temps for a few days they rarely went over 35C and the fan did seem to kick in occasionally (albeit at around 400rpm).

              I dont have any worries. As long as your fan kicks in when under heavy load then all is fine.

              For peace of mind I'd load the CPU and watch the fan RPM to see if it kicks in as the temps rise above 30C.

              cheers

              Harry

              Comment

              Working...
              X