Tweet
ASROCK Z690 Taichi Dr. Debug Error Codes
Anyone familiar with asrock dr. Debug codes?
My motherboard, brand new,, is cycling thru 00, 0F, 7F, never settles on one
I had newegg send me a 2nd motherboard and i returned the first as that one was doing the same thing. Chances are 2 motherboards are bad is slim, I would think, so is there something in doing wrong?
Ive taken out all memory to see if it settled on error code 53 but it still cycled, albeit it did have 53 in the cycle
Ive uninstalled and reinstalled the cpu countless times. No pins are bent.
Ive cleared CMOS after each time.
According to this website - https://forum.level1techs.com/t/list...s-codes/114364 - (2017), the error codes are:
00 - not used
0F - microcode not loaded
7F - Reserved for future AMI DXE codes
My Setup:
ASROCK Z690 Taichi MB
Intel 12900KF
Corsair Dominator DDR5
ML360 Illusion AIO
2x asrock radeon 6900 XT
My motherboard, brand new,, is cycling thru 00, 0F, 7F, never settles on one
I had newegg send me a 2nd motherboard and i returned the first as that one was doing the same thing. Chances are 2 motherboards are bad is slim, I would think, so is there something in doing wrong?
Ive taken out all memory to see if it settled on error code 53 but it still cycled, albeit it did have 53 in the cycle
Ive uninstalled and reinstalled the cpu countless times. No pins are bent.
Ive cleared CMOS after each time.
According to this website - https://forum.level1techs.com/t/list...s-codes/114364 - (2017), the error codes are:
00 - not used
0F - microcode not loaded
7F - Reserved for future AMI DXE codes
My Setup:
ASROCK Z690 Taichi MB
Intel 12900KF
Corsair Dominator DDR5
ML360 Illusion AIO
2x asrock radeon 6900 XT