I am trying to add an Nvidia A100 GPU to a system that has been rock solid for about a year.
Components:
ASRock Taichi P1.70
Ryzen Threadripper 3960X Microcode 830f10/8301039
2 x (RAID1) ADATA XPG SX8200 Pro 1TB 3D NAND NVMe Gen3x4 PCIe M.2 2280
SAPPHIRE NITRO+ Radeon RX 5700 XT 100416NT+8GSR 8GB 256-Bit GDDR6 PCI Express 4.0 x16 ATX Video Card
G.SKILL Ripjaws V Series 64GB (4 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel XMP 2.0
G.SKILL Ripjaws V Series 64GB (2 x 32GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel XMP 2.0
Enermax MaxTytan 80+ Titanium certified Full Modular 1250W Power Supply
The system above has worked absolutely flawlessly for 9 months. No complaints, no issues.
I have installed the latest BIOS as of today.
I am trying to add an Nvidia A100 GPU.
With the A100 in PCIe slot 1 (closest to CPU) or slot 3 (middle on the board), the system will not boot - not even the ASRock logo with del/F2 option to go to bios appears. In other words, the monitor receives no HDMI signal even after waiting for 10+ minutes. The mouse and KBD also do not get USB power.
On steady-state (after waiting 2-3 minutes) the system draws ~170W power (from the power supply LED display).
The board does draw some power, as it heats up - to the touch.
I pulled the AMD Video Card and put in a small/old NVIDIA GE Force GT 1030 video card (does not require PCIe power) to simplify the setup. Same result.
I realize this is not a common setup - I am not a gamer or miner - this is for simulations - Matlab, Comsol, etc.
If anyone has done something similar, or is an expert on ASRock OC Bios and specifically the PCIE4 options - your help would be greatly appreciated?
The Dr.Debug codes shown after about 2-3 minutes are:
ad
df
36
05
84
de
Thank you,
Components:
ASRock Taichi P1.70
Ryzen Threadripper 3960X Microcode 830f10/8301039
2 x (RAID1) ADATA XPG SX8200 Pro 1TB 3D NAND NVMe Gen3x4 PCIe M.2 2280
SAPPHIRE NITRO+ Radeon RX 5700 XT 100416NT+8GSR 8GB 256-Bit GDDR6 PCI Express 4.0 x16 ATX Video Card
G.SKILL Ripjaws V Series 64GB (4 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel XMP 2.0
G.SKILL Ripjaws V Series 64GB (2 x 32GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel XMP 2.0
Enermax MaxTytan 80+ Titanium certified Full Modular 1250W Power Supply
The system above has worked absolutely flawlessly for 9 months. No complaints, no issues.
I have installed the latest BIOS as of today.
I am trying to add an Nvidia A100 GPU.
With the A100 in PCIe slot 1 (closest to CPU) or slot 3 (middle on the board), the system will not boot - not even the ASRock logo with del/F2 option to go to bios appears. In other words, the monitor receives no HDMI signal even after waiting for 10+ minutes. The mouse and KBD also do not get USB power.
On steady-state (after waiting 2-3 minutes) the system draws ~170W power (from the power supply LED display).
The board does draw some power, as it heats up - to the touch.
I pulled the AMD Video Card and put in a small/old NVIDIA GE Force GT 1030 video card (does not require PCIe power) to simplify the setup. Same result.
I realize this is not a common setup - I am not a gamer or miner - this is for simulations - Matlab, Comsol, etc.
If anyone has done something similar, or is an expert on ASRock OC Bios and specifically the PCIE4 options - your help would be greatly appreciated?
The Dr.Debug codes shown after about 2-3 minutes are:
ad
df
36
05
84
de
Thank you,
Comment