Announcement

Collapse
No announcement yet.

Q1900-itx

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Q1900-itx

    Hello,


    during last weekend, after quite few years of continuous usage, my home NAS based on the MB Q1900-ITX just died.


    At first I tried to reboot the system but the NAS would not power on (the PSU's fan tried to spin up for a couple of seconds and then died off). The speaker connected to the MB do not produce any sound during the 1/2 seconds of power on.


    Since no signs of life has been spotted I tried the following actions one at time, and as you may imagine without any luck:


    - Visually inspected the MB, no signs of burn out or excessive heat, deformations or physical damages;
    - Changed the BIOS battery, two times;
    - Swapped the PSU with another one (same exact model);
    - Changed the power button, two times;
    - Taken out ram and carefully reset in place;
    - Checked the connections to HDDs (both SATA and power)
    - Reset the BIOS on pin 2-3 (without battery)


    No action yielded positive results. The motherboard is just able to power on the PSU's fan for 1/2 seconds and then everything goes silent. After few seconds , autonomously, the fan start again spinning for 1/2 seconds and then stops (and the cycle get back).


    Do you have any idea if the MB is just dead or is there anything I con do to reset it to normal functionality?


    Thanks
Working...
X