C2550D4I Unable to access IPMI via Web Browser

[cHrome08]

Hi Guys,

I would like to ask for advice.
I am not sure what I did wrong.
I was able to install FreeNAS using the C2550D4i motherboard and UNAS Chassis.
After finishing the installation, i put it one side as I was still waiting for enough budget to buy the HDDs.

So a month went and I have bought some HDDs to install.
When i turn it on, FreeNAS is all working fine but the problem is with IPMI.
When I go to BIOS to see the BMC Version, it is blank.
The BIOS version is P2.30 which is the latest one when I am writing this post.
Also in BIOS, the BMC Self Test Status is "Failed".

I am able to ping the IPMI interface, but I am not able to connect to it via web browser.
Can anyone guide me on what I can do to resolve the issue please.
Appreciate it.

Regards,
Han

[Retteren]

Re: C2550D4I Unable to access IPMI via Web Browser

When I go to BIOS to see the BMC Version, it is blank.
The BIOS version is P2.30 which is the latest one when I am writing this post.
Also in BIOS, the BMC Self Test Status is "Failed".

Hi Han,

Were you able to resolve this? - if not, I would recommend you to do an RMA on the board. It shouldn't say that the BMC is "Failed".
Contact either your reseller or AsRockRack directly.