970 pro3+ crazy temps

[themaster1]

[themaster1]

[themaster1]

Re: 970 pro3+ crazy temps

Anyone ?
as of now i have put a limit of 70 % for "max cpu state" in the power savings (win7) so the cpu run between 800 mhz and ~2100 mhz (instead of 3200). Not ideal .
amd cool 'n quiet is enabled
idle temps, :
corsair's pump: 4591 rpm (never changes or very little)
cpu fan : 1200 rpm (can go up to 2000 rpm if there is cpu load..noisy)
idle temps voltages (from AXTU):
Vcore: 1.075v
5V: 5.160v
cpu northbridge: 1.1000v
southbridge : 1.10v
pcie vdda: 1.81v
3.3v: 3.296 v (a bit low no?)
+12v: 12.302v
Ht voltage: 1.125v
cpu vdda: 2.56v
dram: 1.35v (it's some kind of eco green Ram from G.skill, lower voltage-> lower temps and good timings 7-7-7-21-30-2T, 666.7 mhz) i'm using the xmp profile i don't know if it has an influence on the cpu's temps though

[parsec]

Re: 970 pro3+ crazy temps

You went to BIOS 2.00 from BIOS version ??

The maximum rated temperature is 62C, and VCore range is 0.85V - 1.4V, so apparently your VCore is not very high:

AMD Phenom II X4 955 Black Edition - HDZ955FBK4DGM / HDZ955FBGMBOX

Try another monitoring program that will give you more information, this:

HWiNFO, HWiNFO32/64 - Download

[themaster1]

Re: 970 pro3+ crazy temps

I've got two fans for the corsair's heat exchanger moving air in->out and another for the hdd's on the lower front side moving air in->out.2 gpu fans and 1 for the power supply.The pc case is a Lian Li PC B10

At this point i think the culprit is the thermal paste (not doing its job), everything is mounted correctly, i've double checked.

[themaster1]