No announcement yet.

Ultra Fast boot for H81 Pro BTC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ultra Fast boot for H81 Pro BTC

    Hi

    I have a H81 Pro. I tried to use Ultra Fast boot option, but every times, it just restarts and circle back to UEFI screen.


    Here are some specs:
    H81 Pro BTC
    Kingston SSD 120GB
    i5-4670 3.40GHz
    8GB DDR3
    Windows 8.1 Pro

    Any idea? Did I miss something?

  • #2
    Re: Ultra Fast boot for H81 Pro BTC

    Ultra Fast boot only works with a UEFI booting Windows 8 installation. That does not just mean a board has UEFI firmware, Windows 8 must be installed with an option called CSM set to disabled and usually you cannot use a Windows installation disk, you must install from a USB flash drive.

    A guide about this can be found here: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

    Comment

    Working...
    X