Announcement
Collapse
No announcement yet.
N68c-s
Collapse
X
-
Re: N68c-s
In my experience, software often reads some wrong. Currently it tells my my mainboard is 65k degrees celcius warm in most software, but when I check in BIOS its at around 21 as it should be. So if your bios has a build in temp reader, check that.
If this is really the case that its so warm, you either got heat-stocking cause of wrong mounted fans or the cooler on that part isn't mounted properly/gone lose in transportMy advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
Whitey:Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)
Comment
-
Re: N68c-s
My N650SLI-DS4 motherboard uses the Nvidia chipset and MCP refers to the southbridge chip.
The heatsink on for the MCP might not be secure or you might have restricted airflow around the heatsink if you are using the flat ribbon cables for your hard drive, optical drive or floppy drive.
What brand/model is your computer case?
What is the brand/model of the cpu heatsink/cooler?
How many case fans are in your computer case?
What are the fan sizes and fan speeds?
What is the temperature in the room where you have your computer?
Can you post a picture of the inside of your computer case?Q9650 @ 4.10GHz [9x456MHz]
P35-DS4 [rev: 2.0] ~ Bios: F14
4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
Seasonic SS-660XP2 80 Plus Platinum psu (660w)
WD Caviar Black WD6401AALS 640GB (data)
Samsung 840 Pro 256GB SSD (boot)
SLI @ 16/4 works when running HyperSLICooler Master 120XL Seidon push/pull AIO cpu water cooling
Cooler Master HAF XB computer case (RC-902XB-KKN1)
Asus VH242H 24" monitor [1920x1080]
MSI N460GTX Hawk (1GB) video card
Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium
HT|Omega Claro plus+ sound card
CyberPower CP1500PFCLCD UPSE6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S.
Comment
-
Re: N68c-s
I have a:
Cooler Master Elite 335, with: Cooler 120mm Front, Cooler 120mm Rear.
Cooler CPU: Cooler Master Hyper TX3 Dual Fan
Processor: Phenom X4 9850 125W TDP
Memory: 2X2GB DDR2 800
HD: 500GB 7200RPM
Motherboard: Asrock N68C-S
Font: C3 Tech 350WR
Video card: Nvdia GT430 1GB
This temperature would not be normal for a chipset that uses Southbridge and Northbridge together?
Comment
-
Re: N68c-s
In your bios, check the "system" or MCP temperature.
When in windows, only use one temperature monitoring application at a time.
Download and see what HWMonitor or other applications report for temperatures.
Unless you have a serious air flow problem in your case, normal system/mcp should probably be less than about 30 - 40o (C).Q9650 @ 4.10GHz [9x456MHz]
P35-DS4 [rev: 2.0] ~ Bios: F14
4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
Seasonic SS-660XP2 80 Plus Platinum psu (660w)
WD Caviar Black WD6401AALS 640GB (data)
Samsung 840 Pro 256GB SSD (boot)
SLI @ 16/4 works when running HyperSLICooler Master 120XL Seidon push/pull AIO cpu water cooling
Cooler Master HAF XB computer case (RC-902XB-KKN1)
Asus VH242H 24" monitor [1920x1080]
MSI N460GTX Hawk (1GB) video card
Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium
HT|Omega Claro plus+ sound card
CyberPower CP1500PFCLCD UPSE6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S.
Comment
-
Re: N68c-s
I don't know of any chipsets that have a "single" Northbridge/Southbridge combination setup.
Some AMD setups have an integrated memory controller in the cpu.
Do a web search using: amd chipset block diagram
and look at the chipset block diagram image for your specific chipset.
HardwareSecrets.com has articles that cover chipsets, but their website has been up and down recently.
You need to confirm if other software monitoring programs report the same high MCP temperature.Q9650 @ 4.10GHz [9x456MHz]
P35-DS4 [rev: 2.0] ~ Bios: F14
4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
Seasonic SS-660XP2 80 Plus Platinum psu (660w)
WD Caviar Black WD6401AALS 640GB (data)
Samsung 840 Pro 256GB SSD (boot)
SLI @ 16/4 works when running HyperSLICooler Master 120XL Seidon push/pull AIO cpu water cooling
Cooler Master HAF XB computer case (RC-902XB-KKN1)
Asus VH242H 24" monitor [1920x1080]
MSI N460GTX Hawk (1GB) video card
Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium
HT|Omega Claro plus+ sound card
CyberPower CP1500PFCLCD UPSE6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S.
Comment
-
Re: N68c-s
If the southbridge is really at 80o (C), the heatsink will too hot to touch briefly.
If the temperature is less than 50o (C), it will be warm to the touch.
Your motherboard might have a faulty sensor, or the high temperature reading might be a known issue and a newer bios version might fix the temperature reading.
You might need to contact ASRock tech support directly by using the support section of their website.Q9650 @ 4.10GHz [9x456MHz]
P35-DS4 [rev: 2.0] ~ Bios: F14
4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
Seasonic SS-660XP2 80 Plus Platinum psu (660w)
WD Caviar Black WD6401AALS 640GB (data)
Samsung 840 Pro 256GB SSD (boot)
SLI @ 16/4 works when running HyperSLICooler Master 120XL Seidon push/pull AIO cpu water cooling
Cooler Master HAF XB computer case (RC-902XB-KKN1)
Asus VH242H 24" monitor [1920x1080]
MSI N460GTX Hawk (1GB) video card
Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium
HT|Omega Claro plus+ sound card
CyberPower CP1500PFCLCD UPSE6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S.
Comment
-
Re: N68c-s
It looks like the southbridge heatsink uses push pins for mounting it to the motherboard.
You might be able to improve cooling the chip where you:- remove the heatsink
- clean the old thermal interface material (TIM) using 91% pure rubbing alcoho
- apply a small thin layer of tim to the top of the chip
- reinstall the heatsink
Your English is fine
Q9650 @ 4.10GHz [9x456MHz]
P35-DS4 [rev: 2.0] ~ Bios: F14
4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
Seasonic SS-660XP2 80 Plus Platinum psu (660w)
WD Caviar Black WD6401AALS 640GB (data)
Samsung 840 Pro 256GB SSD (boot)
SLI @ 16/4 works when running HyperSLICooler Master 120XL Seidon push/pull AIO cpu water cooling
Cooler Master HAF XB computer case (RC-902XB-KKN1)
Asus VH242H 24" monitor [1920x1080]
MSI N460GTX Hawk (1GB) video card
Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium
HT|Omega Claro plus+ sound card
CyberPower CP1500PFCLCD UPSE6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S.
Comment
-
Re: N68c-s
I'm glad that google translator can make sense of my posts
Check out http://forums.tweaktown.com/video-ca...tml#post395596, posts #81 and #83, where I installed a 92mm cooling fan for my graphics card. I used plastic cable ties to secure the fan. I think that the best heatsink cooling will be with the fan very close to the heatsink. A cooling fan installed on the side of the case might work well if you use a cardboard tube as a fan shroud to focus the airflow dircectly to the heatsink.
I am afraid to change the chipsetQ9650 @ 4.10GHz [9x456MHz]
P35-DS4 [rev: 2.0] ~ Bios: F14
4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
Seasonic SS-660XP2 80 Plus Platinum psu (660w)
WD Caviar Black WD6401AALS 640GB (data)
Samsung 840 Pro 256GB SSD (boot)
SLI @ 16/4 works when running HyperSLICooler Master 120XL Seidon push/pull AIO cpu water cooling
Cooler Master HAF XB computer case (RC-902XB-KKN1)
Asus VH242H 24" monitor [1920x1080]
MSI N460GTX Hawk (1GB) video card
Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium
HT|Omega Claro plus+ sound card
CyberPower CP1500PFCLCD UPSE6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S.
Comment
-
Re: N68c-s
don't know when you have bought it, if there is still warranty, returning it for an exchange might be an option if you don't want to mess with it yourselfMy advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
Whitey:Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)
Comment
Comment