No announcement yet.

Motherboard help..

  • Filter
  • Time
  • Show
Clear All
new posts

  • Motherboard help..

    Ok im going to get a new mother board..mine has intergraded grafics which i HATE!! The mother board i want to get needs a PCI Express slot for my grafics card..ok can this be done or not? And if so what motherboard can i get or do you recomend? Get one with no intergraded grafics..and if i do get one will there be any problems with just switching them out? i run windows xp.And intel pentium 4
    and i perfer to get one that runs the same ram i already have...some one help...thanks

    computer specs:
    Motherboard : Augsburg (No PCIE x16 Slot)
    Manufacturer : Intel
    Dimensions : 9.60 inches by 9.60 inches [243.84 mm by 243.84 mm]
    Form Factor : Micro ATX
    CPU Socket/Slot Type : LGA775
    Chipset : Intel 915G + ICH6
    RAM Type : DDR PC3200 (400MHz) DIMM
    Number of RAM Slots : 4
    Total RAM Capacity : 4096
    RAM Stick Size Limit : 1024
    Front Side Bus Speed : 533/800 MHz
    ISA Slots : 0
    PCI Slots : 2
    PCI Express 1x Slots : 1
    PCI Express 16x Slots : 0

    CPU : CPU,P4 519 3.06GHZ 533FSB 1M L2
    Last edited by Barca; 04-12-2006, 11:36 PM.

  • #2
    Re: Motherboard help..

    A lot of what you get will depend on what you're willing to spend on a motherboard. There are a lot of choices when given the criteria of only PCI-E and Intel P4 compatible. However, your dimensions show that you are looking at a mATX board and not a standard one. Is this from a SFF system? If so your list of choices will go down, but there are still some options.
    Old age and treachery will overcome youth and skill
    My Toys