Announcement

Collapse
No announcement yet.

Need help with RAM.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help with RAM.

    I recently bought a new RAM Crucial 4GB DDR3 1600 UDIMM 1.5v CT51264BA160BJ (DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.5V • 512Meg x 64 )and I'm having this problem : when I start the computer it freezes at Starting Windows screen.

    My Pc Specs:
    Nanya Elixir DDR3 2GB 1333
    PC3-10700 M2Y2G64CB8HC5N-CG x2 (Dual-Channel)
    Gigabyte P55M-UD2
    Intel Core i3 540 3.06Ghz


    Bios:
    F11

    Advanced Frequency Settings:

    CPU Clock Ratio 23x

    Advanced Core Features [Press Enter]:

    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Enabled]
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................5.86Ghz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333 1333
    PCI Express Frequency (MHz)..............[Auto]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333 1333
    Performance Enhance (SPD)............. [Turbo]
    DRAM Timing Selectable (SPD)............ [Auto]
    Profile DDR Voltage ..................1.5v
    Profile QPI Voltage ..................1.1v


    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9] [Auto]
    tRCD....................................[9] [Auto]
    tRP.....................................[9] [Auto]
    tRAS...................................[24] [Auto]

    >>>>> Advanced Timing Control

    tRC....................................33 [Auto]
    tRRD...................................4 [Auto]
    tWTR...................................5 [Auto]
    tWR....................................10 [Auto]
    tWTP...................................21 [Auto]
    tWL....................................7 [Auto]
    tRFC...................................74 [Auto]
    tRTP...................................5 [Auto]
    tFAW...................................20 [Auto]
    Command Rate (CMD).................. 1 [Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Auto]
    CPU Vcore..................1.19375v..[Auto]
    QPI/VTT Voltage..........1.100v.....[Auto]

    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]

    >>> DRAM
    DRAM Voltage..............1.500v.....[Auto]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Address VRef............0.750v.....[Auto]
    Ch-B Address VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page (there isn' such thing
    but something similiar is USB Storage function [Enabled] )
    Last edited by Powilsssss; 02-15-2014, 09:23 PM.

  • #2
    Re: Need help with RAM.

    Are you trying to use both, Crucial 1600 and Elixir 1333 RAM?
    Last edited by Tralfaz; 08-27-2014, 02:26 AM. Reason: typo

    Comment


    • #3
      Re: Need help with RAM.

      yes,but i already got another RAM.

      Comment


      • #4
        Re: Need help with RAM.

        To begin with, DDR3 RAM isn't at it's best when, "mixed and matched". Even when using the same make and model, if not bought as a matched set, it may not work well together. At best, you can run different types of RAM at the speed of the lowest module. At worst, it won't work, at all.

        Comment


        • #5
          Re: Need help with RAM.

          idk if this is solved or not. but ontop of the diffrennt types and speeds of ram which i never had an issue with myself doing..your bclk is 133, should it be 100?

          Comment

          Working...
          X