Front USB problem

[swinger]

ok heres the problem I have a x-dreamer case with the front usb and now i want to use them. the mobo im using is an 8rda+ so im sure many of you are familiar with it. problem is when i hook up the front usb ports to the usb3 connector on the mobo the system wont boot so obviously there is a problem, and im pretty sure its to do with the pin arrangement. Here are some pics i drew of the different pin arrangements. First here is the arrangement on the motherboard as it is in the manual:

[swinger]

And heres the layout on the connector for the front USB. any ideas how i need to re-arrange it to make it work, thanks, btw theres two connectors for the front usb and the other would just be marked VCC2, Data + 2 ect.

[Wiggo]

I don't know about the shield or over voltage connections as I've yet to come across them so how does it go with just the four others connected? :?:

[swinger]

ya those were the two that stumped me, how do you suggest i try to hook it up then without those two, just hook up everything else except for shield?

[Wiggo]

Yes leave the shield connection off and the ports should work as all the cases and mobo's that I've used have only use those four other connections.

[swinger]

thanks a lot man that did the trick, i had this problem quite a while but never got around to trying to fix it, thanks for the help man, cheers