i've noticed that my motherboard reads that i have 1048mb or ram when it boots up, when in fact i have 1024mb. i have two 512mb sticks of samsung K4H560838E-TCC4 PC400 DDR (3200) set at a vdimm of 2.6v with timings of 9-4-4-3. if i opt for tighter timings the system is unstable.
i've also noticed in mbm5 that the vcore on my mobo fluctuates like crazy. i've seen it vary from 1.57-1.84 while my cpu was at idle the whole time. this occurs when i manually set the vcore in the bios or when i let the bios auto select the vcore.
i'm running at stock. 166mhz x 13 for 2172mhz.
should i be considering an RMA of my board or are these fluctuations natural? i haven't even begun to mess with overclocking of this system as system stability has been at question at stock speeds. any help would be appreciated.
i've also noticed in mbm5 that the vcore on my mobo fluctuates like crazy. i've seen it vary from 1.57-1.84 while my cpu was at idle the whole time. this occurs when i manually set the vcore in the bios or when i let the bios auto select the vcore.
i'm running at stock. 166mhz x 13 for 2172mhz.
should i be considering an RMA of my board or are these fluctuations natural? i haven't even begun to mess with overclocking of this system as system stability has been at question at stock speeds. any help would be appreciated.
Comment