MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: FAST CPU Clock Ratio ..........................: 9X Fine CPU Clock Ratio.....................:.0.0 CPU Frequency ...........................: 4.05GHz Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: Mhz 450 PCI Express Frequency (Mhz) .........:Set to 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: <<< 800mV PCI Express Clock Drive.................: <<< 900mV CPU Clock Skew (ps)....................: <<< 50ps MCH Clock Skew (ps)...................: <<< 150ps DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [400MHz] System Memory Multiplier ..............: [2.00D] Memory Frequency (Mhz) ..............:1066 900 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ [5] tRCD ......................................... [5] tRP'...........................................[5] tRAS.......................................... [18] Advanced Timing Control tRRD...........................................4 [5] tWTR.......................................... 4 [14] tWR............................................8 [14] tRFC...........................................68[AUTO] tRTP...........................................4 [5] Command Rate (CMD) ....................:0 [2] Driving Strength Profiles Driving Strength ............................[OC-1200] Channel A Static tRead Value.........................:7-10 [10] tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:7-10 [10] tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control Voltage Type.………... Manual CPU CPU Vcore….………...............1.25000V..........: [1.3000V] CPU Termination…..... 1.200V*.......: <<< Leave CPU PLL…………………....1.500V*.......: << Please set to stock, Auto overvolts this way to much CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly MCH/ICH MCH Core…………….....1.100V...........: << [1.180V] MCH Reference….…….0.800V...........; <<< Leave MCH/DRAM Ref.…......0.900V...........: <<< Leave ICH I/O……………….....1.550V............: <<< Leave ICH Core…………...……1.100V............: <<< Leave DRAM DRAM Voltage ……....1.800V............: [2.28V] DRAM Termination .…0.900V............: <<< Leave Channel A Reference 0.900V............: <<< Leave Channel B Reference 0.900V............: <<< Leave Advanced Settings Limit CPUID Max. to 3.....................: [Disabled]